Crane 168741 Hyd Roller Camshaft
#1
Registered
Thread Starter
Join Date: Jul 2008
Location: Darwin, Australia
Posts: 730
Likes: 0
Received 0 Likes
on
0 Posts
Crane 168741 Hyd Roller Camshaft
I'm putting up for sale my spare Crane 168741 Hydraulic Roller camshaft to suit Gen 6 BBC 454-502ci.
Arguably one of the best aftermarket camshafts available from Crane.
I have no idea what they're worth these days or whether you can still get them from Crane Cams.
Open to offers, it's as new in the box so let me know what you think it's worth.
Here's the specs:
Part Number: 168741 Grind Number: HR-236/359-2S-12 IG
Engine Identification:
Start Yr. End Yr. Make Cyl Description
1996 Up CHEVROLET 8 ROUGH IDLE, PERFORMANCE USAGE, GOOD MID AND UPPER RPM TORQUE AND HP, MARINE PERF. 3400-3800 CRUISE RPM, 10.0 TO 11.5 COMP. RATIO ADVISED. BASIC RPM 3000-6500
Engine Size Configuration
454-502 C.I. V
Valve Setting: Intake .000 Exhaust .000 HOT
Lift: Intake @Cam 359 @Valve 610 All Lifts are based
on zero lash and theoretical rocker arm ratios.
Exhaust @ Cam 372 @Valve 632
Rocker Arm Ratio 1.70
Cam Timing: TAPPET @.004
Lift: Opens Closes ADV Duration
Intake 38.0 BTDC 80.0 ABDC 298.0 °
Exhaust 86.0 BBDC 40.0 ATDC 306.0 °
Spring Requirements: Triple Dual Outer Inner
Part Number 99896
Loads Closed 132 LBS @ 1.906 or 1 29/32
Open 414 LBS @ 1.306
Recommended RPM range with matching components
Minimum RPM 3000
Maximum RPM 6500
Valve Float 7000
Cam Timing: TAPPET @.050
Lift: Opens Closes Max Lift Duration
Intake 11.0 BTDC 45.0 ABDC 107 236.0 °
Exhaust 59.0 BBDC 5.0 ATDC 117 244.0 °
Arguably one of the best aftermarket camshafts available from Crane.
I have no idea what they're worth these days or whether you can still get them from Crane Cams.
Open to offers, it's as new in the box so let me know what you think it's worth.
Here's the specs:
Part Number: 168741 Grind Number: HR-236/359-2S-12 IG
Engine Identification:
Start Yr. End Yr. Make Cyl Description
1996 Up CHEVROLET 8 ROUGH IDLE, PERFORMANCE USAGE, GOOD MID AND UPPER RPM TORQUE AND HP, MARINE PERF. 3400-3800 CRUISE RPM, 10.0 TO 11.5 COMP. RATIO ADVISED. BASIC RPM 3000-6500
Engine Size Configuration
454-502 C.I. V
Valve Setting: Intake .000 Exhaust .000 HOT
Lift: Intake @Cam 359 @Valve 610 All Lifts are based
on zero lash and theoretical rocker arm ratios.
Exhaust @ Cam 372 @Valve 632
Rocker Arm Ratio 1.70
Cam Timing: TAPPET @.004
Lift: Opens Closes ADV Duration
Intake 38.0 BTDC 80.0 ABDC 298.0 °
Exhaust 86.0 BBDC 40.0 ATDC 306.0 °
Spring Requirements: Triple Dual Outer Inner
Part Number 99896
Loads Closed 132 LBS @ 1.906 or 1 29/32
Open 414 LBS @ 1.306
Recommended RPM range with matching components
Minimum RPM 3000
Maximum RPM 6500
Valve Float 7000
Cam Timing: TAPPET @.050
Lift: Opens Closes Max Lift Duration
Intake 11.0 BTDC 45.0 ABDC 107 236.0 °
Exhaust 59.0 BBDC 5.0 ATDC 117 244.0 °
#10
Registered
Thread Starter
Join Date: Jul 2008
Location: Darwin, Australia
Posts: 730
Likes: 0
Received 0 Likes
on
0 Posts
Thanks lads.
Yes, shipping will most likely add about $50-65 knowing Aus Post.
I'd take $375 ONO plus shipping I suppose but I might try and sell it locally too. I just thought it best to see if anyone on here might need it first.
Yes, shipping will most likely add about $50-65 knowing Aus Post.
I'd take $375 ONO plus shipping I suppose but I might try and sell it locally too. I just thought it best to see if anyone on here might need it first.