Bravo I outdrive 1.5
#1
Registered
Thread Starter
iTrader: (1)
Join Date: Apr 2003
Location: Knoxville, TN
Posts: 877
Likes: 0
Received 0 Likes
on
0 Posts
Bravo I outdrive 1.5
Bravo I outdrive 1.5:1 ratio. Needs to be painted, does not leak came off of 1990 twin engine boat with Mag 454s (365hp) so it was never worked very hard. Boat was kept in a marina with an electrical issue, so there is some electrolysis on the drive, but other than looks it has no effect on it.
This drive is a standard side water pickup (SWP), 1.5 ratio drive. It does have a nose cone on it. Right now it has a Latham Marine end cap on for external hydraulic steering.
$600 with NO end cap, $750 with Latham Marine end cap.
[email protected]
This drive is a standard side water pickup (SWP), 1.5 ratio drive. It does have a nose cone on it. Right now it has a Latham Marine end cap on for external hydraulic steering.
$600 with NO end cap, $750 with Latham Marine end cap.
[email protected]