Top Gun blower hatch
08-15-2014, 09:12 AM
#1
VIP Member
Top Gun blower hatch
Anyone need a twin step style hatch for a pre 99 Gun? This hatch was from my mold and was raised to accommodate blowers but after intercoolers were added customer decided to go a different route with his hatch. Its never been mounted and is painted Cigs factory white. Not a real big deal to cut the center section and drop it back down, i just dont wanna mess with it, to busy here and thought I'd put it out here to see if anyone wanted or needed it as is. $2800
no pad for it and that blue thing on the top was just some tape holding a vinyl swatch for the upholstery guy.
no pad for it and that blue thing on the top was just some tape holding a vinyl swatch for the upholstery guy.
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Last edited by glassdave; 08-15-2014 at 09:58 AM.
08-15-2014, 10:02 AM
#3
thnx jbk
Dave at XT Innovation can make a pad for this btw. He has done a couple for me and is familiar with this one, its kind of a "one off".
Dave at XT Innovation can make a pad for this btw. He has done a couple for me and is familiar with this one, its kind of a "one off".
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
