2 Mercury Racing ITS Standoff Boxes, CMI Exhuast, Bravo 1 Drive, HP Gimbals and Props
#1
Registered
Thread Starter
2 Mercury Racing ITS Standoff Boxes, CMI Exhuast, Bravo 1 Drive, HP Gimbals and Props
1 New and 1 Professionally rebuilt ITS Stand-off Boxes with attached HP Gimbals and built-in External Hydraulic steering. Perfect condition! $6000 new,$5000 rebuilt... I also have 2 HP Gimbals, fully rebuilt. $2000 each... I also have a Bravo 1 Outdrive for sale! Drive is perfect, Looks brand new! This was a spare drive that had very little use ever. Includes drive cooling shower. $2500... I also have 2- 21" pitch Mercury Mirage Propellers. In perfect condition, right and left rotations. $300 for set... CMI Stainless Steel Headers, fits Merc/Chevy 502ci or 500HP motors. Includes silent choice adapters and mufflers. $1800... 2nd set in picture is already sold!... Latham Drive Tie bar and Bravo brackets. $200... Calls only! 239-443-8233
Go to http://fortmyers.craigslist.org/lee/bpo/4901218738.html for pictures!
Go to http://fortmyers.craigslist.org/lee/bpo/4901218738.html for pictures!
#3
Registered
So its boxes are for both are 11k? And a set of hp gimbals is 4k?
#4
Registered
Thread Starter
Yes $4000 for both fresh HP Gimbals, and I will know in the morning, but I believe the rebuilt ITS Box is SOLD. New ITS is still available, it is all new, never installed, still on the pallet from Mercury. It includes the trim rams, standoff box and HP Gimbal with Built in hydraulic steering. It is the complete transom package. Fits standard Gimbal holes $6000. Feel free to call me to discuss and arrange shipping. 239-443-8233
#6
Registered
Thread Starter
I'm not sure, I received it as part of a swap for 2 Bravo 3's I was selling. It was stored in his garage and looks brand new. He bought it used as a spare but never needed to put it on the boat. The case says it is a XZ which was the model prior to the XR so it should have all good parts, just not the XR straight cut gears.
http://www.offshoreonly.com/classifi...ll/60875_4.jpg
http://www.offshoreonly.com/classifi...mall/60875.jpg
http://www.offshoreonly.com/classifi...ll/60875_4.jpg
http://www.offshoreonly.com/classifi...mall/60875.jpg
#7
Registered
Thread Starter
Here is a current listing to see more pictures.
http://fortmyers.craigslist.org/lee/bpo/4950306865.html
http://fortmyers.craigslist.org/lee/bpo/4950306865.html
#8
Registered
Thread Starter
CP5899, I just saw what boat you have. I used to race for velocity powerboats when your boat was built. I was Bob Bull's driver in Factory 1 class and A Class. Great boat, especially if you add weight to the front to balance it out. When properly balanced it will run thru any water conditions nicely. If you have any questions about set up, let me know.
#9
Registered
Thread Starter
Rebuilt ITS is SOLD. I still have 1 Brand New ITS still on the pallet from mercury/ $6000, 2 Professionally rebuilt HP Gimbals/ $2000each, 1 Bravo 1 drive/ $2500, 1 set of CMI stainless headers with silent choice and muffler tips/ $1800 and 2 -21" pitch Mercury Mirage Propellers, right and left rotations/ $300 for set.
Click on link for pictures: http://fortmyers.craigslist.org/lee/bpo/4950306865.html
Call for more info, 239-443-8233
Click on link for pictures: http://fortmyers.craigslist.org/lee/bpo/4950306865.html
Call for more info, 239-443-8233
#10
Registered
Thread Starter
Rebuilt ITS is SOLD. I still have 1 Brand New ITS still on the pallet from mercury/ $6000, 2 Professionally rebuilt HP Gimbals/ $2000each, 1 Bravo 1 drive/ $2500, 1 set of CMI stainless headers with silent choice and muffler tips/ $1800 and 2 -21" pitch Mercury Mirage Propellers, right and left rotations/ $300 for set.
Click on link for pictures: http://fortmyers.craigslist.org/lee/bpo/4950306865.html
Call for more info, 239-443-8233
Click on link for pictures: http://fortmyers.craigslist.org/lee/bpo/4950306865.html
Call for more info, 239-443-8233