poiuy10

Looking for clamp on tails, straight with a slight slope to the transom. Needing 2 sets, to complete the exhaust.... the boat is a 10 meter Fountain w/ transmissions. ( requires a little longer tail to poke thru the transom ) if anyone has spares or someone that could fabricate 'wet tails' I would appreciate any input.
I have had CMI price the work and wanted to see if anyone out there can produce the same product for less, doesn't hurt to ask.
Picture on left is for the style of clamp and picture on right shows actual boat for installation.

getrdunn

iTrader: (7)

Gonna find out if mine fit hopefully by the weekend. If not I will have the four tails you need.

getrdunn

iTrader: (7)

According to cmi I am within an 1/16 of their center to center specs so we'll see how accurate they are.

poiuy10

Hope things fit together for your sake... thanks for the response.

poiuy10

Well,,, are you in the clear with your exhaust system, did you have the clearance ? Any photos ??

getrdunn

iTrader: (7)

Got held up on installing k-planes. Wanted to get them installed before engines. I will keep u posted. Tabs should be done tomorrow or Wednesday.

poiuy10

Are you having any luck this week with your upgrades... ? Tabs on yet ?