Parting Scarab
#1
Registered
Thread Starter
Join Date: Sep 2010
Location: Fort Walton Bch. FL.
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Parting Scarab
Two pair of CMI e-top headers never repaired never any issues $1100 per set, tails are modified bravos to fit TRS
Tails not the best but free with headers
External hydraulic steering air over hydraulic, helm, lines, reservoir, cylinders, fittings $1000
TRS steering wing plates $150 ea
Keikhaefer controls $400
Bolsters $1500
Gaffrig gauge set twin engine $950
Fresh water cooling heat exchangers $500 per one volvo one mercury one mounts on back the other on front BBC
All prices plus shipping and OBO. More to come I'm parting out the compleat boat. Scarab III
[ATTACH=CONFIG]541153[/ATTACH][ATTACH=CONFIG]541154[/ATTACH]
[ATTACH=CONFIG]541155[/ATTACH][ATTACH=CONFIG]541156[/ATTACH]
[ATTACH=CONFIG]541157[/ATTACH][ATTACH=CONFIG]541158[/ATTACH]
[ATTACH=CONFIG]541159[/ATTACH][ATTACH=CONFIG]541160[/ATTACH]
[ATTACH=CONFIG]541161[/ATTACH]
Tails not the best but free with headers
External hydraulic steering air over hydraulic, helm, lines, reservoir, cylinders, fittings $1000
TRS steering wing plates $150 ea
Keikhaefer controls $400
Bolsters $1500
Gaffrig gauge set twin engine $950
Fresh water cooling heat exchangers $500 per one volvo one mercury one mounts on back the other on front BBC
All prices plus shipping and OBO. More to come I'm parting out the compleat boat. Scarab III
[ATTACH=CONFIG]541153[/ATTACH][ATTACH=CONFIG]541154[/ATTACH]
[ATTACH=CONFIG]541155[/ATTACH][ATTACH=CONFIG]541156[/ATTACH]
[ATTACH=CONFIG]541157[/ATTACH][ATTACH=CONFIG]541158[/ATTACH]
[ATTACH=CONFIG]541159[/ATTACH][ATTACH=CONFIG]541160[/ATTACH]
[ATTACH=CONFIG]541161[/ATTACH]
Last edited by raisingkane; 05-17-2015 at 03:53 PM.
#4
Registered
Thread Starter
Join Date: Sep 2010
Location: Fort Walton Bch. FL.
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Gaffrig Monster Gauges are tach, oil psi,oil temp, water temp, water psi, fuel level, fuel psi, volts, two of each, I also have to senders I can pull out of the motors to go with the gauges
Last edited by raisingkane; 05-17-2015 at 03:35 PM.
#7
Registered
Thread Starter
Join Date: Sep 2010
Location: Fort Walton Bch. FL.
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Still have the gauges.
Yes I plan on selling the motors, one runs the other has a broke valve and need a rebuild $5000 for the pair with
Out the headers plus shipping, never had salt water run for cooling in the blocks, heads,or intakes.
Yes I plan on selling the motors, one runs the other has a broke valve and need a rebuild $5000 for the pair with
Out the headers plus shipping, never had salt water run for cooling in the blocks, heads,or intakes.
#10
Registered
Thread Starter
Join Date: Sep 2010
Location: Fort Walton Bch. FL.
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
The steering will work, but you will need Bravo wing plates for the your out drives. $1000 OBO
I still need to get a pic of the right out drive I'll get one in the AM.
Make offer on whole boat still together, listed for $7500 on CL no trailer. $2500 for torsion trailer will not sell till boat is going
I still need to get a pic of the right out drive I'll get one in the AM.
Make offer on whole boat still together, listed for $7500 on CL no trailer. $2500 for torsion trailer will not sell till boat is going
Last edited by raisingkane; 05-27-2015 at 09:28 PM.