Pair of gen 6 502's
#1
Platinum Member
Platinum Member
Thread Starter
iTrader: (6)
Pair of gen 6 502's
Selling a pair, about 150 hrs since rebuilt, I'm currently rebuilding the heads new valves, Inconel exhaust, springs, retainers and valve job, these are GM performance heads, I had to tear one completely down because a valve came in contact with the piston, head was cleaned up, repaired and CC'd . These are stock rotating assemblies, kellogg cranks, dimple rods and je-700 pistons and custom Isky cams, they were dyno'd at 525-530, Id like to sell as is, would consider trades for complete 871-1071 blowers, intakes, carbs, chillers, SSM lll 3a's and gimbles
Open to cash offers, buyer pays shipping
These came out of my buddies TG, he replaced them with 572's
These are complete from carb to pan, no accessories + aluminum water pumps
Open to cash offers, buyer pays shipping
These came out of my buddies TG, he replaced them with 572's
These are complete from carb to pan, no accessories + aluminum water pumps
#2
Platinum Member
Platinum Member
Thread Starter
iTrader: (6)
Something wrong with this site I cant edit my own post.............the carbs are 850's same part # as the HP500 engines
#4
Platinum Member
Platinum Member
Thread Starter
iTrader: (6)
I may, need to let the ad run a bit,
thanks man
thanks man
#6
Platinum Member
Platinum Member
Thread Starter
iTrader: (6)
You mean someone on this board was wrong in their info given to me, Im shocked LOL
thanks for the input
thanks for the input
#7
Platinum Member
Platinum Member
Thread Starter
iTrader: (6)
Just in time for Christmas
#9
Platinum Member
Platinum Member
Thread Starter
iTrader: (6)
Griffs correct just looked at it .... 9022....800cfm....these intakes are deff. marine, they have a brass insert in the thermo housing area and are 8 bolt instead of 6
Last edited by F-2 Speedy; 12-22-2015 at 06:32 AM.