FS: HP500 Carb, Crane Gold Rockers, muffler actuators, exhaust tips
01-17-2016, 04:44 PM
#1
FS: HP500 Carb, Crane Gold Rockers, muffler actuators, exhaust tips
HP500 Carb, 362 hours on it. Photos below. $250 + Shipping. **EDIT: I believe it's a Holley 800CFM double pumper, I'll check this evening to make sure.
Electric solenoids for Teague muffler tips. These are as received from a set of tips I purchased here used and converted to pneumatic operation. Teague lists these at $115 each - I'm asking $100 for the pair + Shipping. I tested both this afternoon, both actuate. No rips in the boots, but they're not as supple as new - starting to get a little hard. There is some surface rust under the end caps.
Crane gold roller rockers. 362 hours on these, came from a 1995 HP500C. Two pieces have been radiused to clear the Merc blue racing valve covers. One piece has some damage from misalignment - contact with a push rod and valve stem, did not affect operation once properly aligned. There are some scratches in the anodizing from contact with a socket during disassembly. Please see photos below. $150 + shipping
4" angle cut tips with internal flappers. I think these may be from Hardin but I can't be positive - they were on the boat when I purchased it. They really need to be polished and cleaned up. I rubbed some turtle wax chrome cleaner/polish on one and it clean up, but there are still some swirl marks. Hardin has these at $100 each, I'm asking $100 for the pair + shipping
HP500C cam - I'll get photos this week. Came from running engine with 362 hours. $150+ shipping.
HP500C stock pistons and rods - The pistons are may not be worth reusing, but the rods may be? I'm open to offers and can post pics later this week.
I'll do my best to keep the PM box cleaned out, but email at
jrsandner at roadrunner dot com is the best way to reach me.
Ryan
Electric solenoids for Teague muffler tips. These are as received from a set of tips I purchased here used and converted to pneumatic operation. Teague lists these at $115 each - I'm asking $100 for the pair + Shipping. I tested both this afternoon, both actuate. No rips in the boots, but they're not as supple as new - starting to get a little hard. There is some surface rust under the end caps.
Crane gold roller rockers. 362 hours on these, came from a 1995 HP500C. Two pieces have been radiused to clear the Merc blue racing valve covers. One piece has some damage from misalignment - contact with a push rod and valve stem, did not affect operation once properly aligned. There are some scratches in the anodizing from contact with a socket during disassembly. Please see photos below. $150 + shipping
4" angle cut tips with internal flappers. I think these may be from Hardin but I can't be positive - they were on the boat when I purchased it. They really need to be polished and cleaned up. I rubbed some turtle wax chrome cleaner/polish on one and it clean up, but there are still some swirl marks. Hardin has these at $100 each, I'm asking $100 for the pair + shipping
HP500C cam - I'll get photos this week. Came from running engine with 362 hours. $150+ shipping.
HP500C stock pistons and rods - The pistons are may not be worth reusing, but the rods may be? I'm open to offers and can post pics later this week.
I'll do my best to keep the PM box cleaned out, but email at
jrsandner at roadrunner dot com is the best way to reach me.
Ryan
Last edited by Ballistic Beak; 01-18-2016 at 12:23 PM.
01-28-2016, 08:20 PM
#8
I'll include the push rods with the rockers.
Someone expressed interest the rockers this afternoon, if I don't hear back I'll update the thread,
Ryan
