540 Dart tall deck block , pistons , rods ,etc $2500
#1
Registered
Thread Starter
540 Dart tall deck block , pistons , rods ,etc $2500
540 Dart tall deck block , pistons , rods ,etc
Dart Tall Deck 4.5" bore block with billet main caps
Eagle 4340 Crank 2 pc rear seal 4.25" stroke.
Eagle rods 6.535" with ARP 8740 bolts.
Probe pistons .030 over making it a 548"
Block,pistons and rods all in excellent shape,
block will have to be bored/honed for pistons as its still standard bore
Was told crank has lost hardening in the bearing areas ..
I will throw in for free but dont think it can be saved
$2500 cash firm for everything,no trades
(Lago Vista,north side of Lake Travis,Austin Tx)
email is best way to get a hold of me
[email protected]
pictures:
https://www.facebook.com/photo.php?f...7965242&type=3
https://www.facebook.com/photo.php?f...0765312&type=3
https://www.facebook.com/photo.php?f...3605383&type=3
https://www.facebook.com/photo.php?f...6285450&type=3
https://www.facebook.com/photo.php?f...8565507&type=3
Dart Tall Deck 4.5" bore block with billet main caps
Eagle 4340 Crank 2 pc rear seal 4.25" stroke.
Eagle rods 6.535" with ARP 8740 bolts.
Probe pistons .030 over making it a 548"
Block,pistons and rods all in excellent shape,
block will have to be bored/honed for pistons as its still standard bore
Was told crank has lost hardening in the bearing areas ..
I will throw in for free but dont think it can be saved
$2500 cash firm for everything,no trades
(Lago Vista,north side of Lake Travis,Austin Tx)
email is best way to get a hold of me
[email protected]
pictures:
https://www.facebook.com/photo.php?f...7965242&type=3
https://www.facebook.com/photo.php?f...0765312&type=3
https://www.facebook.com/photo.php?f...3605383&type=3
https://www.facebook.com/photo.php?f...6285450&type=3
https://www.facebook.com/photo.php?f...8565507&type=3
Last edited by HTRDLNCN; 04-25-2016 at 03:48 PM.
#5
Registered
iTrader: (1)
I have the twin to the one HTRDLNCN is selling here.. (http://www.offshoreonly.com/forums/g...o-results.html)
When we purchased them, they had had lifter failures, put metal through the engine. (previous builder had the lifter oil restrictor plugs installed)
His crank had already been turned 10 / 10 but got a nick in it from disassembly or shipping. When he asked about having it turned .020 he was told that it would have to be re-hardened which cost about the same as just replacing it...
But no, no spun bearings that we're aware of...
Doug
When we purchased them, they had had lifter failures, put metal through the engine. (previous builder had the lifter oil restrictor plugs installed)
His crank had already been turned 10 / 10 but got a nick in it from disassembly or shipping. When he asked about having it turned .020 he was told that it would have to be re-hardened which cost about the same as just replacing it...
But no, no spun bearings that we're aware of...
Doug
Last edited by Boatally Insane; 04-28-2016 at 01:01 PM.
#6
Registered
iTrader: (1)
Join Date: Sep 2013
Location: Norwell, MA
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
How are the bores in the block? My motors are tall deck, 4.380 stroke 4.500 bore 557's, so i can run my rotating assembly in this block if they dont need any boring. Id probably be able to get some credit for the other stuff with my builder as he does ALOT of builds all over the map and Im sure he could use them.