mlitefan2

Moving to a carb setup and have a ton of MPI parts to sell. Engine not hurt, just getting freshened. 450 hours.

2000 502 MPI GenVI - S/N 0L632135

Manifold Assembly - Complete
Plenum Assembly - Complete
MEFI 3 ECU - remapped to increase rev limit and account for Lightning Header install. Very minor adjustments.
MEFI wiring harness
Distributor Assembly
Fuel Rail
Cylinder Heads - Complete
Exhaust Manifolds
Bravo 1 Rams

Bravo 1 24P slightly labbed prop - great condition. Ran 5100 RPM's on 2000 Sunsation 288

Pics to come soon. Unbolted everything last weekend except for Merc Exhaust and Bravo 1 rams. Those were earlier takeoffs.

mike tkach

iTrader: (3)

only one thing missing!

hammerdown500

Which harness is it the injector and ecm harness and or the block harness? How much for the ecm and harness

mlitefan2

ECM harness. I need to keep the block harness for the conversion. $500 for the ECM/ECM harness combo. It's an 009 ECM. I can send a pic if you like. Might be this weekend since I have been on the road.

mlitefan2

Cool Fuel/Fuel pump?

Trying to figure out if I just need to add a regulator or just toss it and go with Holley Red.

tunertech

tried to send you PM but your box is full, Interested in the purchase

hammerdown500

ditch the cool fuel add the regulator and return back to tank.

Sporl Performance

iTrader: (1)

How much for the heads.
Ron 504-616-6005

mlitefan2

Sorry guys, I just joined as a platinum member so I can now receive PM's. Hopefully will also get pics of everything today or tomorrow. Crazy busy with work!

Tunertech, try me on PM again.

Ron, 400 for the set + shipping. I unbolted them from the block and that was it. Valve covers still bolted on.

Sporl Performance

iTrader: (1)

Send some pics to 504-616-6005
Ron