Motor/Drive Assemblies
#1
Registered
VIP Member
Thread Starter
Join Date: Mar 2016
Location: Stephenville
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Motor/Drive Assemblies
Ive got a full power/drive set off a SBC TRS boat. Everything from the carb to oilpan, crank pulley to prop.
One engine has been bored 10 over and has less than 10 hours on rebuild, other motor has knock on bottom end and will need to be rebuilt. Both engines start and run
MercTrans II Transmissions - Both in working order, will need new tailshaft seal on one. Have been converted for cable shifting instead of electronic
Full TRS inner/outer transom assemblies with drives, no issues with units
4 TRS Trim Rams with zero hours on rebuilds
4 Brand new Machined Anchor pins
Have props available for units too
Will send pics upon request
PM or Text is best way to get ahold of me. 210-313-foursev en 37
One engine has been bored 10 over and has less than 10 hours on rebuild, other motor has knock on bottom end and will need to be rebuilt. Both engines start and run
MercTrans II Transmissions - Both in working order, will need new tailshaft seal on one. Have been converted for cable shifting instead of electronic
Full TRS inner/outer transom assemblies with drives, no issues with units
4 TRS Trim Rams with zero hours on rebuilds
4 Brand new Machined Anchor pins
Have props available for units too
Will send pics upon request
PM or Text is best way to get ahold of me. 210-313-foursev en 37