TxHawk

iTrader: (2)

502ci 525HP
Started life as a 502/502 but has been run marine since new. I acquired and rebuilt early this year. Rebuilt by Keith Scroggins in OKC (known marine builder)
New bearings, rings, oil pump, timing set.
Heads were rebuilt with all new valves (stainless/inconel), valve springs and comp 1.7 RA's.
Cam is very close to a 525EFI cam in an Isky grind on 114lsa.
GM Perf Heads and Intake
I have a Victor Jr. Single plane I will include in sale
Carb is QF Marine 850
Ignition is Thunderbolt with HP module

I have run it for no more than 15 hours this season while I worked on the setup on my build. It pushed my 27 Excalibur to 80mph, so it is making some decent power. I can send a video of the last trip out in the boat.

I'd prefer to sell with Carb and Ignition as I plan to reuse everything else.

Stainless Marine Manifolds and Straight Dry Tails could be included for additional money.

$7,500

TxHawk

iTrader: (2)

Last time this engine was run. If you're in need, I'll negotiate various options for the accessories.


http://www.youtube.com/watch?v=lFT-aZovsts

vintage chromoly

iTrader: (3)

That's a great deal!

TxHawk

iTrader: (2)

Bump, spring is around the corner!

TxHawk

iTrader: (2)

New motor is together, I am about to start robbing the accessories from this one.

I am offering it from the air cleaner to the pan to include Thunderbolt ignition. Ill throw in the crossover too!

AWOL

What would be needed for complete swap?

TxHawk

iTrader: (2)

Sent PM with contact info.

TxHawk

iTrader: (2)

Stripped and ready to go. Various accessories negotiable.

28cigarettess

What is the new motor. Did you build one of the ones you got from me?

TxHawk

iTrader: (2)

I had another 502 block. Built a 540 with it.