Register

If this is your first visit, please click the Sign Up now button to begin the process of creating your account so you can begin posting on our forums! The Sign Up process will only take up about a minute of two of your time.

Follow us on Facebook Follow us on Twitter
Page 1 of 3 123 LastLast
Results 1 to 10 of 25
Like Tree3Likes

Thread: Do you need parts? Blowers? Oil Pans? Cranks? Pistons? Water Pumps? Anything Else?

  1. #1
    Platinum Member Platinum Member
    My Boats:
    Outerlimits Legacy
    Join Date
    May 2010
    Location
    Clearwater, FL
    Posts
    118

    Do you need parts? Blowers? Oil Pans? Cranks? Pistons? Water Pumps? Anything Else?

    I am selling parts from two Mercury Racing 900SC motors I had in my Outerlimits. One of which went bad and I chose to start fresh with two completely new motors. Those motors are now built and back in my boat and I'm now left with the task of selling the parts from the 900's. I have included photos of what I have taken off half of 1 of 2 pallets so far since picking them up from the shop I had build my new engines.

    If you have any questions or would like some more photos you're more than welcome to shoot me a pm and I will do my best to accommodate your request. It would be easiest for me to send photos or any answers to any questions you may have by text/email so please include a phone # or email you can be reached at. I am located in the Tampa area and would be happy to have you come by as well for anyone in the area as well. The parts that I have left have been gone through by the well known engine builder just a little south of me who also built the new pair of 1000's that replaced the 900's. So what wasn't any good was scrapped and what was still good I'm now selling. I'm not looking to give the stuff away or be low balled but I'm willing to accept any reasonable offers on any or all parts as a package deal.

    ***The Blowers I have I'd like to sell as a pair and sold as a complete package. Intercoolers up to Flame Arrestors.

    ***Also have a pair of Hering 16.25x33p props for #6 drives I need to sell as well.

    ***Not interested in any trades unless you have a set of props that are 17x36-38p for #6 drives.


  2. #2
    Platinum Member Platinum Member
    My Boats:
    Outerlimits Legacy
    Join Date
    May 2010
    Location
    Clearwater, FL
    Posts
    118
    Last edited by LaVita; 01-03-2017 at 12:47 AM.

  3. #3
    Platinum Member Platinum Member
    My Boats:
    Outerlimits Legacy
    Join Date
    May 2010
    Location
    Clearwater, FL
    Posts
    118
    Last edited by LaVita; 01-03-2017 at 12:50 AM.

  4. #4
    Platinum Member Platinum Member
    My Boats:
    Outerlimits Legacy
    Join Date
    May 2010
    Location
    Clearwater, FL
    Posts
    118
    Last edited by LaVita; 01-03-2017 at 12:56 AM.

  5. #5
    Registered
    My Boats:
    35 Fountain
    Join Date
    Mar 2012
    Location
    Cape coral, FL
    Posts
    3,220
    What blowers?

  6. #6
    Registered
    My Boats:
    97 253 Convincor
    Join Date
    Feb 2005
    Location
    Rock Falls,Illinois
    Posts
    66
    Check your PM's Dustin

  7. #7
    Platinum Member Platinum Member
    My Boats:
    Outerlimits Legacy
    Join Date
    May 2010
    Location
    Clearwater, FL
    Posts
    118
    They are intake up. They are Mooneyham 10/71 blowers with dual 1050 Dominator carbs. Will get some photos of them up later today.
    I.C.U.Lookin likes this.

  8. #8
    Platinum Member Platinum Member
    My Boats:
    Outerlimits Legacy
    Join Date
    May 2010
    Location
    Clearwater, FL
    Posts
    118
    Quote Originally Posted by SED70 View Post
    Check your PM's Dustin
    Sent

  9. #9
    Platinum Member Platinum Member
    My Boats:
    Outerlimits Legacy
    Join Date
    May 2010
    Location
    Clearwater, FL
    Posts
    118

  10. #10
    Platinum Member Platinum Member
    My Boats:
    Advantage 28 MCOB with 575SCI for sale, time to go bigger. Advantage 28' Sport Cat. Time to go faster
    Join Date
    Aug 2010
    Location
    Evansville, IN
    Posts
    1,091
    I would be interested in the crankshafts if they are 4 3/8" stroke. Double keyed? And possibly the oil pans. Are the rods good? what length?
    Last edited by snapmorgan; 01-03-2017 at 11:37 AM.
    THINK BIG. because anyone can think small.


Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
OSO Sponsor
OSO Advertisers


OSO Directory
All times are GMT -5. The time now is 11:35 PM.
Powered by vBulletin® Version 4.2.0
Copyright © 2017 vBulletin Solutions, Inc. All rights reserved.
Search Engine Optimization by vBSEO 3.6.1
Original Poster In Postbit provided by Original Poster In Postbit v1.0.0 (Free) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd. Runs best on HiVelocity Hosting.
Copyright 2011 OffShoreOnly. All rights reserved.