Various Cigarette logo stencils
09-13-2022, 12:07 AM
#1
Registered
Thread Starter
Various Cigarette logo stencils
I have unused stencils leftover from my paint project:
-2 stencils to make the oval cigarette logos for the sides of the boat. I found the original 90's era too round and dated looking, while the newer factory logo is too stretched out to look right on a vintage cig, so had the aspect ratio done right in between, 40" wide by 15" tall. There are 3 parts to each stencil. $120
-2 separate sets of large stencils to paint the cursive "Cigarette" logo. I had mine sized to fill up the cafe's walkway but it should work well on a bullet or top gun. 140 inches long. $80 per
-A set of stencils to paint the "Cafe Racer" logo 20" wide on the sides of the boat. There's actually 3 stencils so you get one extra. $50
You'll need transfer tape and paint! Text 4439751808
-2 stencils to make the oval cigarette logos for the sides of the boat. I found the original 90's era too round and dated looking, while the newer factory logo is too stretched out to look right on a vintage cig, so had the aspect ratio done right in between, 40" wide by 15" tall. There are 3 parts to each stencil. $120
-2 separate sets of large stencils to paint the cursive "Cigarette" logo. I had mine sized to fill up the cafe's walkway but it should work well on a bullet or top gun. 140 inches long. $80 per
-A set of stencils to paint the "Cafe Racer" logo 20" wide on the sides of the boat. There's actually 3 stencils so you get one extra. $50
You'll need transfer tape and paint! Text 4439751808
Last edited by blown; 09-13-2022 at 12:14 AM.
