CPM

This is a very clean pair of 177's I installed them on my Cigarette last year I installed new upper 2.66 pulleys new idler bearings inspected cleaned and serviced them and installed new stainless allen bolts, they have a natural aluminum paint on them, the Carbs are HP Marine series (no choke) cant remember number at moment. also comes with air cleaners and fuel line no water fittings. They are rectangle port intakes one intake is new one used very clean I also have a pair of oval port intakes included (they need cleaning used and painted white)

$3500.00 shipped to lower 48.

On my current engine I went from a 26' 4300-4700 to a 30' 5300

I will not separate them I will accept a wire transfer only my ebay ID is http://www.ebay.com/usr/kingpin2430 if you want to see any feed back on me, The only reason I am or will sell them is I have the boat apart now and freshening engine up and will install bigger blowers if these sell if not they are going right back on.



Link to them running https://www.youtube.com/watch?v=LmG7IV-7Srw

CPM

PM Me for any questions serious people only I will answer them in order received

Swamplizard

Carb details would be great - buddy built forged 454s - basically 454 Mags - will this setup work or too much fuel as calibrated?

CPM

It would work just fine, Ill get carb numbers tonight it has 90 and 99's in it now you would have to tune them for your application

Swamplizard

My Buddy is interested - I sent you a PM

93fountainsig35

Would you sell without the carbs?

mtsoffshore

Still available?

Swamplizard

Swamplizard

Still available????

getrdunn

iTrader: (7)

Great deal for someone. Instant HP without braking the bank for any 454 plus. I wouldn't brake anything up either. Will screw up any serious potential buyer.