cheap / free / offers
#1
cheap / free / offers
all plus shipping
k twin controls need paint, 100 percent functional w/ cable ends 100 bucks.
old style water pick up needs paint has correct bolts w/ o-rings, no grate,50 bucks.
on the cardboard w/ the power steering pump, new pump w/ old res, all brackets were blasted zinc'd and phantom black ready to go, the pulleys were being used for mock up
50 bucks.
on the cardboard w/ the k controls, with the exception of the k controls and water pick up, FREE
big block valve covers i think they are cast aluminum, (i'll check) MAKE OFFER
on the concrete, the 2 stainless water pick ups, bravo pins 20 bucks
nordskog speedo pickup i think i'll make a christmas ornament unless someone really needs to have it.
in the mercury bag is a trs o-ring and circlip FREE
brackets pulleys waterpump snouts valve covers, are mark4,
i have 2 top mount starters and an alternator and 4 trs length gil tails in working order that are probably to heavy to ship for what there worth trs wing plates saddles and tie bar (no ends) MAKE OFFER
gil battery box rough looking but no corrosion 20 bucks
hardin battery box (smaller battery size) 20 bucks
whatever doesn't go by next monday goes to the scrap guy
of the 2 guys that i know of who are restoring a SCARAB , all of the stainless vents, cockpit courtesy and engine room lights and ashtrays from a 1984 scarab are FREE
k twin controls need paint, 100 percent functional w/ cable ends 100 bucks.
old style water pick up needs paint has correct bolts w/ o-rings, no grate,50 bucks.
on the cardboard w/ the power steering pump, new pump w/ old res, all brackets were blasted zinc'd and phantom black ready to go, the pulleys were being used for mock up
50 bucks.
on the cardboard w/ the k controls, with the exception of the k controls and water pick up, FREE
big block valve covers i think they are cast aluminum, (i'll check) MAKE OFFER
on the concrete, the 2 stainless water pick ups, bravo pins 20 bucks
nordskog speedo pickup i think i'll make a christmas ornament unless someone really needs to have it.
in the mercury bag is a trs o-ring and circlip FREE
brackets pulleys waterpump snouts valve covers, are mark4,
i have 2 top mount starters and an alternator and 4 trs length gil tails in working order that are probably to heavy to ship for what there worth trs wing plates saddles and tie bar (no ends) MAKE OFFER
gil battery box rough looking but no corrosion 20 bucks
hardin battery box (smaller battery size) 20 bucks
whatever doesn't go by next monday goes to the scrap guy
of the 2 guys that i know of who are restoring a SCARAB , all of the stainless vents, cockpit courtesy and engine room lights and ashtrays from a 1984 scarab are FREE
Last edited by outonsafari; 07-28-2017 at 07:09 PM.
#3
VIP Member
VIP Member
Id like the 2 WP snouts and the throttle assembly.
actually I dont need the throttle assembly but if thats a trim switch on it I'd like that.
actually I dont need the throttle assembly but if thats a trim switch on it I'd like that.
Last edited by Rhythm and Blues; 07-28-2017 at 08:37 PM.
#4
Banned
iTrader: (9)
the very last of your of post all the SS vents and so on for free. I will take them Thanks. I really want the flat vents on the far right in your pic. (concrete) but it looks like your offering all of them so if I could get all them - I thank you..
ALso if the 2 stainless pick ups pictured with the vents - are not going to be taken I will want them as well --- also any brackets that might not be taken. yet. Also any pulley s. not taken yet
Hardin battery box for 20 unless it is in rough shape - or how rough ?
Let me know thanks and what I owe you.
ALso if the 2 stainless pick ups pictured with the vents - are not going to be taken I will want them as well --- also any brackets that might not be taken. yet. Also any pulley s. not taken yet
Hardin battery box for 20 unless it is in rough shape - or how rough ?
Let me know thanks and what I owe you.
Last edited by BUP; 07-28-2017 at 09:14 PM.
#5
rhythm and blues, no trim switch on k controls,
also sick stinger called the pumps pulleys and brackets in post 2.
let me know what you'd like to do about the controls.
sick stinger, i will box up and wrap everything and have it on it's way monday PROVIDED you pm me your address and phone #, because i do not keep peoples info
all the parts are 50 bucks plus shipping, ill text you a picture of the shipping label w/ track # and shipping amount, then you can pay pal me.
also sick stinger called the pumps pulleys and brackets in post 2.
let me know what you'd like to do about the controls.
sick stinger, i will box up and wrap everything and have it on it's way monday PROVIDED you pm me your address and phone #, because i do not keep peoples info
all the parts are 50 bucks plus shipping, ill text you a picture of the shipping label w/ track # and shipping amount, then you can pay pal me.
#7
bup, i had to move some stuff to get into the crate that had the battery boxes in for pics and measurements, (the scarab specific parts are on hold until end of week)
the gill battery box is rough looking in the casting no corrosion, they were spot blasted down to the red coating and re shot w/ phantom black, i did that because i thought there was an issue under the original paint. size is 13 3/4 X 7. 20 bucks plus shipping
the hardin battery box is in good shape, it was removed from the boat and put in a crate. it has a plastic top. size is 10 9/16 X 6 3/4 20 bucks plus shipping
in the crate i found a brand new stainless trim pump bracket that replaces the original pot metal mercury ones that rust away, they are 99.95 new, sell for 50 bucks plus shipping
endeavor, bup called the stainless water pick ups, let's see after he gets the battery box specs and pics
sick stinger got your address, need phone # so i can text picture of shipping label w/ track # and ship cost, thanks
the gill battery box is rough looking in the casting no corrosion, they were spot blasted down to the red coating and re shot w/ phantom black, i did that because i thought there was an issue under the original paint. size is 13 3/4 X 7. 20 bucks plus shipping
the hardin battery box is in good shape, it was removed from the boat and put in a crate. it has a plastic top. size is 10 9/16 X 6 3/4 20 bucks plus shipping
in the crate i found a brand new stainless trim pump bracket that replaces the original pot metal mercury ones that rust away, they are 99.95 new, sell for 50 bucks plus shipping
endeavor, bup called the stainless water pick ups, let's see after he gets the battery box specs and pics
sick stinger got your address, need phone # so i can text picture of shipping label w/ track # and ship cost, thanks
Last edited by outonsafari; 07-29-2017 at 08:34 AM.
#9
Banned
iTrader: (9)
Thank you I will pass on the HARDIN BATTERY box as I have plenty brand new just like it plastic ones already. My bad I thought it was Alum.
Anything else I asked for in post 4 let me know and what I owe you.
The 2 water pick ups that are in (concrete) with vent pics. And if the vents do become available I would take them as well. Any brackets and pulley's let me know. Do not need trim brackets currently. Thank You
Anything else I asked for in post 4 let me know and what I owe you.
The 2 water pick ups that are in (concrete) with vent pics. And if the vents do become available I would take them as well. Any brackets and pulley's let me know. Do not need trim brackets currently. Thank You
Last edited by BUP; 07-29-2017 at 10:31 AM.
#10
gentlemen, please pm me shipping address and phone # so i can text picture of shipping label w/ tracking # and cost, this way you know the stuff is on the way, then you can pay pal me. all prices are plus shipping thank you.
the member who pm'd me, give me till end of week to get it sorted out
bup -- both stainless water intakes are 20 bucks
stealth1 -- if r&b passes they are yours (pm him, since there is no trim switch, he may not breeze thru here again)
so i have left,
an aluminum gil battery box
a hardin aluminum battery box w/ plastic top,
stainless steel power trim pump mount
and cast aluminum valve covers.
bravo trim pins
the member who pm'd me, give me till end of week to get it sorted out
bup -- both stainless water intakes are 20 bucks
stealth1 -- if r&b passes they are yours (pm him, since there is no trim switch, he may not breeze thru here again)
so i have left,
an aluminum gil battery box
a hardin aluminum battery box w/ plastic top,
stainless steel power trim pump mount
and cast aluminum valve covers.
bravo trim pins