B&M 174 Supercharger
08-10-2017, 01:01 PM
#1
B&M 174 Supercharger
B&M 174
Made 8 lbs at 4200 ft elevation on a 454 with an 1150 cfm dominator carb and a ported dom adaptor. New nachi bearings and teflon strips with less than 12 hours run time. Has 2.4 drive ratio. Dominator has less than 6 hours run time. Intake is gasket matched for rectangular ports. Blower includes 3 grove accessory pulley, bottom pulley, and water outlet. Will sell with out carb and adapter for $1400 shipped or with dominator for $1900 shipped. If it goes with the carb I'll include the dom fuel line but not the gauge and regulator. It's dusty but will polish up nice.
Cant get pics to work at the moment but I'll try again later. Text me if you'd like to see some.
Thanks,
Travis
505 331 5576
Made 8 lbs at 4200 ft elevation on a 454 with an 1150 cfm dominator carb and a ported dom adaptor. New nachi bearings and teflon strips with less than 12 hours run time. Has 2.4 drive ratio. Dominator has less than 6 hours run time. Intake is gasket matched for rectangular ports. Blower includes 3 grove accessory pulley, bottom pulley, and water outlet. Will sell with out carb and adapter for $1400 shipped or with dominator for $1900 shipped. If it goes with the carb I'll include the dom fuel line but not the gauge and regulator. It's dusty but will polish up nice.
Cant get pics to work at the moment but I'll try again later. Text me if you'd like to see some.
Thanks,
Travis
505 331 5576
Last edited by 89Force235; 08-11-2017 at 07:15 AM.
