scarabman

iTrader: (1)

(2) sets of 4" clamp on mufflers in good, but not great condition. work well. took the serious bark out of my dry headers without robbing power. $250 a pair, or $450 for both sets, plus ride.

scarabman

iTrader: (1)

bump

FunHome

Can you email me some pics?
[email protected]

getrdunn

iTrader: (7)

And tx to 231-233-15 one three. Just for back ups in which case kicked off lake as long as they don't rob hp.

Tks
johnn

scarabman

iTrader: (1)

pics sent to both. I ran them for a while on my Innovation 600s with dry exhaust (water dump at tip, so mufflers were wet) and they didnt seem to take away much, if any, power. There is a bit of pitting here and there but overall they look pretty good

getrdunn

iTrader: (7)

Tks for the pics. They look nice. I am shocked you didn't loose any rpm with them. What kind of power did you run them on with dry pipes? You get a chance measure total length. Tks
John

getrdunn

iTrader: (7)

Just read message above mine. Sorry Didn't catch that when I posted.

scarabman

iTrader: (1)

I might have lost a little rpm, but the boat ran 92-3, so I didnt spend much time WOT. Total length is 10.5 +/- with the slip on collar flare being about 2" so installed added length about 8.5

scarabman

iTrader: (1)

Forgot about these. back at it. somebody needs to quiet their boat down a shade.

Webbsatwinni

iTrader: (1)

Thanks for the good sale and quick shipment, these will help me get rid of the turndowns! Thanks again!