Powder coating
#1
Registered
Thread Starter
Join Date: Jul 2006
Location: Seabrook, Tx
Posts: 881
Likes: 0
Received 0 Likes
on
0 Posts
Powder coating
Anyone know where I can get my side vents stripped and powder coated? They are starting to peel. Or is it cheaper to just replace them?
gerritm
gerritm
#2
Social Distortion
Gold Member
#5
Registered
Thread Starter
Join Date: Jul 2006
Location: Seabrook, Tx
Posts: 881
Likes: 0
Received 0 Likes
on
0 Posts
I called Allied Powdercoating here in Houston and they are getting me a price. I don't know anything about their quality. Give me your guys name ands # or ask him what an approximate cost is. They need to be stripped and the dimensions are about 18"long x 3" wide.
No, I haven't seen the video, yet. Did you get it in the mail? The poker run heli shoot was shortened due to the weather and Stu called us to see if we would meet out in the bay and do a run for the heli so they could get some additional shots. They flew over us for quite a while. Only about 6 boats showed up for the second shoot. It wasn't as much fun as running out of the jetties and catching some air. I am looking forward to seeing it.
#7
Registered
Join Date: Apr 2007
Location: Conroe, TX
Posts: 3,570
Likes: 0
Received 0 Likes
on
0 Posts
I just got some powdercoating done by the guy tbone used, he did a good job. It is spectrum powdercoating in cypress. Ask for D.A. 832-912-9100. He charged me $45 for each bolster stand which was pretty cheap I thought.
#9
Registered
Join Date: Jan 2006
Location: Lake Conroe TX
Posts: 2,310
Likes: 0
Received 0 Likes
on
0 Posts
his parking lot is nice and big if you are in a hurry i recommend driving in there with your boat.... even if your co-pilot says it looks a little tight in there ?!?!?!?!