Ford 2.5" reciever?

[ciaoderhead]

I have a 2010 F350 with the factory 2.5" receiver. Tried Reese and Curt ball mounts and niether fit. Trailer shop called Reese Tech support and they say they they hear that 3-times a week. Sanded off the powder coat andi it's still .020 oversize. I can fly cut the ball mount but that's BS.

Anyone else had this problem?

Are there other brands that fit?

[Chuck]

I've had this problem numerous times on the road. Keep it in the truck when not in use because only the Ford one will work. I try to keep a spre behind the seat now.

[DM]

I have same truck. Just bought a "Titan" by Reese 18000# Ball mount w/ 3 1/2" rise. 2 5/16" Ball. I believe the part # was 45323 but double check I'm going by memory I don't have it in front of me. I'm wondering about a pin that locks. I'm sure someone makes one for the 2.5" receiver.

[ciaoderhead]

Originally Posted by Chuck

I've had this problem numerous times on the road. Keep it in the truck when not in use because only the Ford one will work. I try to keep a spre behind the seat now.

So Ford makes ball mounts?

That's what I worried about, being on the road and needing one.

[ciaoderhead]

Originally Posted by DM

I have same truck. Just bought a "Titan" by Reese 18000# Ball mount w/ 3 1/2" rise. 2 5/16" Ball. I believe the part # was 45323 but double check I'm going by memory I don't have it in front of me. I'm wondering about a pin that locks. I'm sure someone makes one for the 2.5" receiver.

Thanks, I'll check that #.

Locks are here http://www.reese-hitches-online.com/reese_titan_wd.htm

[Smitty]

Personally I would rip that hitch off and take it to a recycler.

Spend a few bucks and get a real hitch that can actually carry some weight and not fall apart.

Check out a Reese or a Putnam.