Wanted #5's or # 4's with big shaft
#1
Registered
Thread Starter
Wanted #5's or # 4's with big shaft
Need a good deal on a pair 1.5 to 1 #5's or 4's 1 have a a pair of 4's now, looking for rebuildable cores or fresh rebuilds , thanks Ray
Last edited by notda1; 04-10-2008 at 05:34 AM.
#2
Registered
Thread Starter
Thanks Daredevil,I just talked to Colabella ,seems like the way to go if I keep the 4's.Really would like to upgrade to the 5's if I can get a good deal thanks
#6
Registered
Thread Starter
Yes and thanks for your help.That fellow sounds like my best option so far. I wanted to up upgrade my drives, hoped to find something reasonable out here
#8
I have a pair of big shaft #5's, 1.5 ratio, that have all new net-forged straight cut upper gears, all new bearings etc. with 0 hours on them since Matt @ TNT did them. I have 2 sets of #5 gimbles also.
I also have a pair of new #3A, 1.5 ratio drives with all new internals and also 0 hours if you want a longer drive.
Let me know.
Gary
ph: 763-473-8963
I also have a pair of new #3A, 1.5 ratio drives with all new internals and also 0 hours if you want a longer drive.
Let me know.
Gary
ph: 763-473-8963
Last edited by RMPRam; 04-11-2008 at 02:04 PM.
Thread
Thread Starter
Forum
Replies
Last Post
jody165
General Q & A
2
10-13-2003 07:44 PM