tcwcar

iTrader: (1)

that would be nice to have one, but just dont have the room i that mystique, I'm hoping i have enuff room for 2 little ones.....thanks anyway....

fireboatpilot

It's 6" round and 18" tall. I had it mounted center keel. Has 2- 1 1/2" inlets, 2- 1 1/2" outlets for engines and 2- 3/4" outlets for inner coolers. I ran 3- 468 blower engines off of it with no problem. I didn't have coolers so I used the 3/4" outlets for a relief valve and a hose flush. Doesn't take up much space, since it's so low down in the hull.

tcwcar

iTrader: (1)

that would be nice its just to long, with that small engine compartment, and the notch transom, theres just on room...sorry

boatstogo

iTrader: (1)

Thought you already found some. If still looking, I'll take and send you pics of the larger Perko and two smaller strainers I have.

tcwcar

iTrader: (1)

no still looking....like to see them

boatstogo

iTrader: (1)

Sorry it took so long to get back to you but had to take some pics. The 2 Perko units are Cat 493/500 6'' X 4" bowl with 1 1/4" inlet. One has 1 1/4" outlet, one has split 3/4" outlets and one has fitting on top to winterize. The 2 polished units are 8" X 3" bowl with 1 1/4" inlets. One has single 3/4" outlet, other has 5/8" and 1/2" outlets. Both polished units have heat damaged acrylic tops and shut off vinyl dipped handles. Your choice, $100 a piece plus shipping. Also have several thru hull polished stainless dumps, ball valves, Y tubes etc. Let me know what you are trying to plumb and I can probably hook you up. Thanks

tcwcar

iTrader: (1)

thanks.... i will let you know bosatstogo

tcwcar

iTrader: (1)

anymore sea strainers out there for sale