88Spyder

Looking for a pair of 454's or 502's. prefer a pair of tired take-outs. will be going thru both of the motors, heads are not a necessity. would prefer most of the accessories, exhaust will be new when they get dropped in my boat. these are going to get mated up to TRS set-ups.

Unlimited jd

iTrader: (5)

Baja226sport was considering selling 2 fresh 509's for pretty much the machining costs

kidapache

have two 454s 550hp take out that run great for $15,000 for both

ROB FREEMAN

iTrader: (2)

Almost new hp 500 will give wtitten warrentee motors are great at time of delivery . Cost 16 k to have rebuilt by fountain . 30 to 35 hrs . 12 k complete drop ins .minus my bell hpusings ..see hp 500 in swap shop .pics there also . thanks .and good luck

KWright

Have a pair of 502's. 60 hrs on each. One is mercury racing hp 500
The other is new gen6 Bowtie block manely h beam rods/ pistons, and Callie's crank, basically a hp clone. Comes all assembled with pan Hv pump, balancer, flywheel, timing chain n cover, cam, isky tie bar hyd. Roller lifters.
Ad is in the swap shop. Reason for selling building new 565". Can also include heads if needed

eddie

iTrader: (7)

I have a pair of carb 454 Mags with 120 original hours on them $3,500.00 each complete ready to drop in.

TomFTM

iTrader: (3)

I have a pair of 454 bowtie block melin head motors canton 10 qt pans app 500 hp, that I took out of a 302 formula that I sold . trs boat , no exhaust. pm for more details . Tom