Pistons and Rods
#1
Registered
Thread Starter
iTrader: (1)
Join Date: Jun 2008
Location: Houston, TX
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Pistons and Rods
Need 2 sets of each.
4.5 Bore Pistons for 6.385 Rod with 4" Stroke.
6.385 H-Beam Rods.
Prefer pistons to be either flat top or like factory pistons. Trying to keep compression low enough for pump gas.
Complete rotating assembly for 540 would also work. Have 9.8 deck. 1 Gen IV and 1 Gen VI.
4.5 Bore Pistons for 6.385 Rod with 4" Stroke.
6.385 H-Beam Rods.
Prefer pistons to be either flat top or like factory pistons. Trying to keep compression low enough for pump gas.
Complete rotating assembly for 540 would also work. Have 9.8 deck. 1 Gen IV and 1 Gen VI.