Looking for Hydraulic new or used TRS
#1
Gold Member
Thread Starter
Join Date: Aug 2006
Location: Westchester ,NY
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Looking for Hydraulic new or used TRS
I am Looking for Hydraulic new or used TRS for my 357 SR 1. The boat had an inside mounted rams. I am not looking to "drill and fill" any holes if I can help not to. It seems to be a Latham Marine set up but I will need to check the mounts for the hull. I am looking for a full set up . Thanks Jim
#2
Registered
iTrader: (30)
that boat did not have latham style .it had the non power assist style witch was removed and sold .i do have everything you would need to put the internal steering back in it though ,the holes in that are an easy fix if you use dowels coated i resin .glad to see its going back together
#4
Registered
Join Date: Apr 2002
Location: Lake of the Ozarks
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
I have both a full AIr over Hydraulic Hynautic system, and also can get an old I believe Mercury system from a 12 meter fountain. Shoot me an email for pics. [email protected]
#6
that boat did not have latham style .it had the non power assist style witch was removed and sold .i do have everything you would need to put the internal steering back in it though ,the holes in that are an easy fix if you use dowels coated i resin .glad to see its going back together
__________________
Thanks, Barry
Driver - High's Fuel Your Journey Cigarette Racing Team #598
Thanks, Barry
Driver - High's Fuel Your Journey Cigarette Racing Team #598