525 EFI or Mercury Racing Valve Covers
#2
Registered
Join Date: Jan 2012
Location: Hagerstown, Md.
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
i will have a used/new set shortly.... i just sent a upper/lower intake manifold, both "mercury" valve covers, coolant exchanger, crossover and brackets to sand blasting. then will be professionally painted with merc. blue....if interested let me know....
#3
Registered
Join Date: Jan 2012
Location: Hagerstown, Md.
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
i will let you guys know when they are done.... it will be couple of weeks cause i just sent them to blasting...i already did my set and they look awsome! are you guys just interested in valve covers?
#7
Platinum Member
Platinum Member
iTrader: (6)
#8
Registered
Join Date: Jan 2012
Location: Hagerstown, Md.
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
the ones i have are off 525 efi....they are engraved MERCURY racing on the port side cover....just like the ones above... i painted mine all blue only because the gray is not paint...mercury paints theirs blue then they put them in cac machine and have the MECURY racing actually engraved into it...and that part is actually just the raw aluminum of the cover....even with them all blue...you can still see the etched part of the words....when they are done with new paint i will be selling for $325.00 plus shipping...again i also will have bare upper and lower manifold, crossover and coolant exchanger all painted blue
#10
Platinum Member
Platinum Member
iTrader: (6)