hoses and fittings for ext steering
#1
Registered
Thread Starter
hoses and fittings for ext steering
I have a dual cylinder add on kit for a single Bravo but I am in need of all the inside and outside hoses as well as the thru hull fittings and tee's..Braided or rubber will be fine as long as it's in good usable condition..Thanks in advance
#2
Platinum Member
Platinum Member
iTrader: (6)
I have 4 rubber hoses and the 4 90* fittings that screw into the cylinders, all used but worked fine when I replaced them with new, all came off IMCO sterring, I just have to find it. Personally I would put all new on it, but that's me, I'll see if I can find it if your interested.
#3
Registered
Thread Starter
I'd be interested if you can find it..The other parts I have are used also so I'd like to get it all installed and make sure it functions like it's supposed to before I spend the money on new..thanks
#4
Registered
Join Date: Mar 2014
Location: Woodstock Ontario Canada
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
I have a complete system that I might just sell the hoses and fittings and all the parts separately
email me [email protected]
email me [email protected]