B&M blower question
#1
B&M blower question
I opened the back plate and it appears the rotors have warm groves into the back cover. The bearing are together but are ready to be changed. I also noticed one of the rotors has a very very slight movement back and forth. I don't believe this is the issue because with the back plate on it holds the rotor in place. Anyways any ideas on why this is worn? Any tricks to replacing the rear bearings? Thanks
#3
Registered
iTrader: (2)
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
send them to the blower shop..they are beyond bearings at this point..with the groves in the case's thet might be able to ne machined or they could be junk..either way i would hate to see one come apart and ruin the engine..