Ssm ii prop
#1
Registered
Thread Starter
Join Date: Jun 2015
Location: Houston Texas
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Ssm ii prop
New to me, 21' Liberator boat and it has a SSM II drive 1.25 : 1 ratio, (No prop) it is the 1 3/8 shaft 19 spline 4" hub. Could you lend me some advice on prop size, pitch, # of blades, etc.. I'm planning on a blown 509 for power. Anyone have any props available for this drive???
Any help/advice would be greatly appreciated..
Any help/advice would be greatly appreciated..
#3
Registered
Thread Starter
Join Date: Jun 2015
Location: Houston Texas
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
FALSE ALARM.... I found one, bought it and they lost it before they could ship it....my luck. Still looking if anyone has something in a 19 spline 4"hub in a 26-27 pitch... anything over 14 1/2" will work... I can have it cut down if bigger.
Thanks in advance...
Thanks in advance...
#6
Registered
Thread Starter
Join Date: Jun 2015
Location: Houston Texas
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts