Cmi rope style tails
#1
Registered
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: Birch Run, Mi
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Cmi rope style tails
lookin to see if anybody has a set of cmi 4.5 OD, thru- hull, rope seal, dry to tip tails layin around, preferably something with a high exit thru the transom.
I have a set that will not work, before I cut them up, change angles, and spend hours & hours tig weldin them back together, id see if anybody had anything, even maybe some long pipes off something else that I can use the materials to make into what I need
This is what im lookin for, I missed out on this deal for reasons out of my control, but the pics show what im lookin for.
http://www.offshoreonly.com/forums/s...tails-trs.html
Thanks.
Buss
I have a set that will not work, before I cut them up, change angles, and spend hours & hours tig weldin them back together, id see if anybody had anything, even maybe some long pipes off something else that I can use the materials to make into what I need
This is what im lookin for, I missed out on this deal for reasons out of my control, but the pics show what im lookin for.
http://www.offshoreonly.com/forums/s...tails-trs.html
Thanks.
Buss
#2
Registered
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: Birch Run, Mi
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Just to clarify they are for a bravo/ etop setup, they don't need to be trs length, just high exit point on the transom, OR if I can find some straight material thats 4.5 " OD to make a set that's good too.