wanted Imco Bravo XR input shaft for Imco extension Box
#1
Registered
Thread Starter
Join Date: Sep 2010
Location: Rüdesheim am Rhein /Germany
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
wanted Imco Bravo XR input shaft for Imco extension Box
Hi,
like the titel says.
I am wanted 2 Imco input shafts for 12 " Extension Box.
The shafts must fit the old bravo 1 XR and X drives.
Waiting for your offers.
Thanks
like the titel says.
I am wanted 2 Imco input shafts for 12 " Extension Box.
The shafts must fit the old bravo 1 XR and X drives.
Waiting for your offers.
Thanks
#5
Registered
Thread Starter
Join Date: Sep 2010
Location: Rüdesheim am Rhein /Germany
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
#8
Registered
Thread Starter
Join Date: Sep 2010
Location: Rüdesheim am Rhein /Germany
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Hi,
i saw the tread you offer the shafts.
O.K. they are a bit rusty but should work if they have the big (XR) cap.
Please give me a price for both inclusive shipping to germany if that is possible.
If the shipping is not posssible i maybe have a shipping adress in the USA.
Thanks
Christian
i saw the tread you offer the shafts.
O.K. they are a bit rusty but should work if they have the big (XR) cap.
Please give me a price for both inclusive shipping to germany if that is possible.
If the shipping is not posssible i maybe have a shipping adress in the USA.
Thanks
Christian
#10
Registered
Sorry for late response, had a death in the family. Mine have the small bearing caps so I don't believe they will work. The rust was from a leaky boot, surface rust, scuff down and repaint.