Imco driveshaft
Need extension driveshaft for imco box xr drive
|
You're going to need to know your bearing cap diameter of the u joint on your drive
|
Let me know if you have grease-able u-joints or the non- grease-able u-joints. I have two imco input shafts but I'm pretty sure the are for the older style XR u-joints.
|
greaseable my xr is probably 8 or so years old it has the c clips on the inside of u joint
|
still looking
|
I don't know if we spoke or not about this. But the ones that I have are for the standard bravo u-joints. HOWEVER, I also have a complete IMCO XR input assembly out of an IMCO SC drive. The IMCO uses standard bravo u-joints. If you are interested I'll swap you your XR input for the IMCO input, plus $350 for the extension shaft, and you will be good to go. The shaft assembly is all IMCO and not merc, and will work on X and XR pinions. The gear end, u-joints, and yoke, are all in near new shape. The extention shaft is in very good condition. Let me know if you are interested.
|
I sent you a pm with my phone number
|
All times are GMT -5. The time now is 07:41 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.