landfish

Looking into purchasing some budget friendly oval port heads for making low end torque on a 454.

Anyone have something good lying around?

airjunky

iTrader: (2)

I have a set of gen 4 heads with 112 chambers reworked for 11/32 stem 188 and 2.19 valves bare castings flat top friendly i may part with , what area are you in

Thebossbultsma

iTrader: (1)

i might have a set off my 454 330 laying at home ill look tn after work

landfish

I am in Southern California. Airjunky, to be honest..."flat top friendly" is over my head. Does that mean flat pistons for overall comp ratio? What I may do is purchase a new 454HO and take the rectangle port heads off and place ovals on to move the power band and torque down lower RPMS. either change or keep HO cam in there. Need to learn more about that part.

Goal is to have a stout roller engine built more efficiently than the dog 310HP 454. I believe we can get better power/torque for at or near the same mileage if done right.

-Rich

getrdunn

iTrader: (7)

Did u find some. I have two sets of 049's and a set of Merlins

landfish

Went another direction. Ordered new GM Marine 502. Thanks for the offer. Very much appreciate it.

mike tkach

iTrader: (3)

tell me about the 049,s,any work done to them and price.pm me if you want to.