Wtd 7.1" steel rods to suit BBC
#3
actually thats good question
I have 4.5" Dia low comp pistons, 8.0 and 11.5 + comp pistons, and have the crank (one piece) so looking to connect the two together, and throw short block together
figure if I found the steel rods, worst case, would upgrade bolts to AP2000
if could make 750hp happy with that
I have 4.5" Dia low comp pistons, 8.0 and 11.5 + comp pistons, and have the crank (one piece) so looking to connect the two together, and throw short block together
figure if I found the steel rods, worst case, would upgrade bolts to AP2000
if could make 750hp happy with that
#7
Yes have a 3.1 stroke Gen VI Bryant crank
adk61: can you send us some pic, information of what you have, [email protected]
cheers
Brett
adk61: can you send us some pic, information of what you have, [email protected]
cheers
Brett