Originally Posted by rageman28 (Post 4083264)

The old f-1 boat has been totaly re-done.Paint,blue printed bottom, new imco gimble and drive.A real 1175 hp,herring 6-blade, windscren, PPI int,completly rerigged with new fuel tank
If your boats don't go 120 mph, you got no shot. As for the white 30, the thing went 106 with 825 hp, another 300 hp, +wilson lower unit,bottom blue-printed , herring propeller, lot's of luck.

Originally Posted by rageman28 (Post 4083335)

Yes. The new owner has years of experience running the old team outlaw boat and has spared no exspence to make this boat the trick/fast piece it is.

Originally Posted by johnnya3 (Post 4083375)

Let's see some pics of the 27 all redone

Originally Posted by BronxPhantom106 (Post 4082937)

here r some shots of the interior the boat is still shrink wrap when i get it off ill get better pictures.

Originally Posted by korvetkeith (Post 4084663)

What blower is that? Looks awesome.

Originally Posted by rageman28 (Post 4086754)

It's a foot more running surface with a swim platform.

Originally Posted by eagledm44 (Post 3618133)

Just stopped up at Rage Performance Boats and saw the new 30 Rage being built. The construction was far superior to any previous models. The fit and finish is second to none. The motor is going in and they're hoping to surpass the 125mph mark. check it out.

Originally Posted by Black Baja (Post 4082929)

Only 2 in existence. Mark corrected all the design flaws of the 27 Activator when he made the 28 Rage. It is an awesome boat. I've ridden in the 2 28's and I don't think there is anything out there that could compete with them...

Originally Posted by TwoKs (Post 4086874)

Is there any video of either one of these 28's running out on water? Would really like to see one in action.

Originally Posted by Mange (Post 4086889)

I know it's been I video from Hudson river run A couple of years ago. A 27, the 28 and a 30 running :) But where to find that video?

Originally Posted by rageman28 (Post 4087156)

All of the Activator/Rage boats are vacume bagged balsa cored bottoms beveled and resin soaked compleatly sealed to stop water intrusion. They have divinicell hull sides and decks also vacume bagged. It would be easy to build them lighter but we like the way they handle at the heavier layup.

Originally Posted by rageman28 (Post 4087156)

All of the Activator/Rage boats are vacume bagged balsa cored bottoms beveled and resin soaked compleatly sealed to stop water intrusion. They have divinicell hull sides and decks also vacume bagged. It would be easy to build them lighter but we like the way they handle at the heavier layup.

Originally Posted by Pantera572 (Post 4086914)

Pictures on the first link and the video is the second link

http://www.offshoreonly.com/forums/s...un-photos.html
http://www.youtube.com/watch?v=MrDR-sPNcT8

Originally Posted by RobF (Post 4087192)

Would a balsa cored hull side 30 been a special order?

Originally Posted by mikebrls (Post 4087305)

would the Balsa core side be stronger then the divinicell ?

Originally Posted by RobF (Post 4087329)

my opinion? Yes.
The "white" one currently under the knife has balsa cored hull sides. Not a crack in it its a strong boat.

Originally Posted by rageman28 (Post 4087364)

Some activator/rage have balsa in the sides, balsa being stronger however the bottom material runs up the side and the deck is glassed to the hull with two layers of 1708 biax, making the sides very strong with either core. If I wanted to save some weight foam was used

Originally Posted by bor (Post 4087292)

keith ,

look in the classifeids ,mark have a nice hull for you !

bor

Originally Posted by 1990pro (Post 4087071)

Your right talk is cheap , so bring your boat down to l.i. South shore poker run and you will find out what the yellow and white boat are packin!

Originally Posted by BronxPhantom106 (Post 4087765)

Which progression did u have put a picture of it up