|
Originally Posted by TwoKs
(Post 4605483)
Figured you were close, is that john burns park boat ramp? Wish this cold spell would go away. I want to get back in the garage and finish up things for my boat for this season. Should have been done last year but didn't get there with it.
|
18 Attachment(s)
Putting a 548 together. Replaced fuel tank this summer with aluminum tank last summer. Didn't need to I just don't trust fuels today with all the new additives they add to it and what it can do to fiberglass tanks. Have too much money going into the engine to hurt it with contaminated fuel. I just have pictures of the work i was doing last summer
|
Originally Posted by TwoKs
(Post 4605931)
Putting a 548 together. Replaced fuel tank this summer with aluminum tank last summer. Didn't need to I just don't trust fuels today with all the new additives they add to it and what it can do to fiberglass tanks. Have too much money going into the engine to hurt it with contaminated fuel. I just have pictures of the work i was doing last summer
|
Nice 27. I know the previous owner and spent some time in Miami on that boat. Never really tried to dial it in but was over 70 with 4 people and full of fuel Good luck
|
Originally Posted by z.zuperboat
(Post 4606632)
Nice 27. I know the previous owner and spent some time in Miami on that boat. Never really tried to dial it in but was over 70 with 4 people and full of fuel Good luck
Hey zuper I sent you a PM |
Originally Posted by TwoKs
(Post 4605931)
Putting a 548 together. Replaced fuel tank this summer with aluminum tank last summer. Didn't need to I just don't trust fuels today with all the new additives they add to it and what it can do to fiberglass tanks. Have too much money going into the engine to hurt it with contaminated fuel. I just have pictures of the work i was doing last summer
|
You should look up Mange on OSO or look up activator racing on FB. He has the 27 molds and has been building them under the Activator name. So he has plunty of stickers.
|
Originally Posted by slpcamaross97
(Post 4614573)
You should look up Mange on OSO or look up activator racing on FB. He has the 27 molds and has been building them under the Activator name. So he has plunty of stickers.
i did try try to contact him with no luck, so had them made. They came out nice if anyone needs the contact info |
| All times are GMT -5. The time now is 12:36 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.