37 owners, questions for you
 

Trying to get some ideas on how to do a few things.
1) where do you store your fenders?, get tired of walking over them to go to the bathroom
2) Anyone know where the depth finder puck is? mine only works in shallow water under 8 foot? other then that it reads 1.2, 5.6 ft etc. is there some magic adjustment for a gaffrig depth finder. this weekend i just kept holding down buttons and it finally worked for about 3 min. but now it is the same.
3) anyone put foot rests in? what do they look like and how did you do it? i like to sit on long cruise's and i dont like my feet dangling.
4) bilge pump in the step, never has bothered me except for this weekend, anyway to hook it to a switch, how do you access it?
5) fridge busted a coil last year, had fixed put back in and wont work, took it out had and fridge guy says it works at his place. still wont work in the boat, light on the breaker panal wont light when i switch it on but the wire gets juice at the fridge. not sure why the switch lite stopped working at the same time. fridge has never worked on ac power and still does not lite works though, wires at fridge dont show any current eitherwhen on in ac mode. what should i look for? getting tired of taking the couch out to work on the fridge.

thanks scott

try the factory for support, or Im sure Brian, Sydways can help you.

Thats funny.:D :D

:rolleyes: ;)

I think he was serious......:eek:

#1. I have no idea.....What fenders? The ones on the trailer or your dually? NEVER, NEVER, EVER RAFT.
#2 It should be in the V-section under the steps into the cabin.
#3 If you order an new boat it is standard. However, yes, we have put them on the older models. Pictures tomorrow.
#4 Brian knows this answer......
#5 Send it back to the factory for repairs or just order another one with the new. Seriously, It's the convertor. Is the Fridge a Tundra?

Cell is 954-658-4972.

Thanks, Pat

NOTTTTTTTTTTTT:D

What are you doing in our forum, no-tech man!????:D

I had brews with Terry in A/C and we talked trash about you all weekend! (but we both had nice things to say about Sandy :drink: )

YA THINK?:evilb:

1 so no one can raft?
2 should i be able to see it through the access door in the bathroom wall?
3 can i order the step?
4 i blame him for making me notice it in the first place
5 yes it is a tundra, so should be that convertor box that is behind the fridge

Scott I have a few suggestions.
1.fenders go in the side gunnels between the helm and back seat.
2.mine is in the hull in the bilge flush mounted.
3.don't have the foot rest so can't help.
4.mine took a crap so i replaced it but the factory one is like on a timer so i'm putting on a switch on the dash.
5. frig took as chit too but call tundra and they had a recall on the power box so they sent me a new one at no cost.
Hope this helps anything else email me or call 540-400-5536

ROFL!!! :D :D

Give me a ring later this week. I'll talk you through how I had mine fixed.

Brian has a raised bar in Monsoon that i like. You can hook your feet under it when standing and rest them on it when sitting. I'm sure we can get him to post a pic.

i will have to see what all i have stuffed in those, i know there are life jackets, throw cusion, lines, ??? sometimes the kids scooters.....

i am a little worried that you have fenders, do you think that is how your clear came off? :D

i will also give tundra a call, thanks

anyone have pics of the foot rest bars??

Mine is the only boat that I have seen with the foot rest pedestal. I don' know where Pat got it from, but it was installed at Todd's request when he was building the boat. I love having it there.

I am currently traveling, and the boat is getting a couple touch ups done. I will try to get a pic soonest. Maybe Pat can lend some info.

Sydwayz I also would like to see thst footrest bacause in my 28 the top step is to high for me and the floor is to low ,I was looking all over for a billet step that would bolt right in between the floor and molded step!Any help would be appreciated. Thanks Phil p.s. my height is 6/2inch

Footrest in my 37 installed at build by Pat:

Couple more:

Ah yes, I remember that footrest bar. I was looking for a pic to post, but Brian beat me to it.

My frig. took a chit again.Only used it twice since it was fixed last year.It will not kick on with a/c or d/c power.Dam

what material is on the floors?

http://www.lonsealspecialty.com/
http://www.lonseal.com/