looking for rubrail for 32 active thunder
 

would like some help finding rub rail for 2002 32 active thunder

Do you have the white two piece rubrail?

If so, its more than likely this:
http://www.tacomarine.com/cat--Rub-R...rail_kits.html

You may consider moving to a Stainless Steel rubrail as an upgrade.

Thats what my plan is.:cool:

Some pics from when Todd upgraded Best Revenge:

http://www.offshoreonly.com/forums/s...&highlight=rub

http://www.offshoreonly.com/forums/s...ight=stainless

rub rail
 

no the type I have is the one piece white.

taco metal products

check www.rubrails.com for pics to match.

They are pretty much all made by taco metals.

Griff, I have a 20' piece that Pat gave me by mistake.....you can have it if you want. It is the white 1-7/8" & my 28 uses the 1-3/8" so I don't need it.

1-7/8" white vinyl rub rail
 

Hey Griff, you still need the rub-rail? It's yours if you don't mind paying the shipping. Just pm me your address.
Chris

Thanks for the offer, but I don't need any. Mine is in good shape. I was just responding to original post.

Yeah, I realized that after I posted....I figured scopam would realize I was making the offer to him.


Scopam, you still need the rail?

I used rubrails.com and found an exact match. Probably need to do it again since it has been a while. The rubrails have to be shipped as freight due to their length so take that into account for planning and $$.

rub rail
 

thanks for the offer, I have not decided on exactly what im going to use. I did like the stainless insert look. Has anyone had any luck cleaning it with anything, About the only way I see with how hard it is will be to sand it out and try polishing it.

Actually, it is coiled into about 40" diameter...that is how Pat delivered it to me. I think Taco-Metal sent it straight though....hmmm, can't remember...either way it costs about $80 to ship.
BTW, the 20' piece I have is an exact match from AT.

I had a piece that I replaced on the Pantera that had been coiled for about 3 years. It was a beotch to get straightened out.

You can clean the rubrail with Acetone. Acetone will remove small scuffs and rub marks. Wax it after you're done.