|
exhaust on 32
im about ready with the rebuilds on audacity im now looking for exhaust, due to the motors sitting up high in the 32 will i have any issues with any certain type of exhaust, as my stock gill was all but touching my engine hatch with the tall gill risers.
|
Originally Posted by rssteiny
(Post 2867889)
im about ready with the rebuilds on audacity im now looking for exhaust, due to the motors sitting up high in the 32 will i have any issues with any certain type of exhaust, as my stock gill was all but touching my engine hatch with the tall gill risers.
Rick, As long as your exhaust was set up as the standard merc thru hull, you should not have a problem wih a different exhaust. I had to have custom pipes made for mine due to running tall deck blocks. Get rid of those Gils, alot of problems with reversion. If you go with the CMI Etops, , the standard tailpipes should fit. Just measure to be on the safe side. |
| All times are GMT -5. The time now is 03:13 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.