|
Engine coupler
On my 32 active thunder with 500 hps do i have to pull the motor to change the engine coupler.
|
Originally Posted by rssteiny
(Post 2953808)
On my 32 active thunder with 500 hps do i have to pull the motor to change the engine coupler.
|
THAT WHAT I WAS THINKING, BUT THEN WHAT WILL YOU CHARGE ME TO FIX THE HOLE:grinser010:
Thanks Pat |
I have seen it done in the boat. Take the drive off. Put a chain hoist on the motor (or let it hang on the front motor mounts, better with the chain hoist) take off the bell housing and change the coupler.
It ain't pretty and it ain't easy but it can be done if you absolutely don't want to pull the motor. By the time you get down to the coupler there aren't too many more connections that need to be disconnected to pull the motor. Tom |
Also saw a transom assembly changed without pulling the motor. Too much for me but it can be done.
|
I am an honor graduate of the Boudreaux School of Mercruiser Marine Technology. :eek:
|
Originally Posted by Thunderstruck
(Post 2953848)
I am an honor graduate of the Boudreaux School of Mercruiser Marine Technology. :eek:
|
Originally Posted by 509 SC
(Post 2954258)
What about big Marie? :drink:
:drink: |
| All times are GMT -5. The time now is 08:49 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.