Go Back  Offshoreonly.com > Owners Forum > Active Thunder
Extreme Measures... Make Over Edition >

Extreme Measures... Make Over Edition

Notices

Extreme Measures... Make Over Edition

Thread Tools
 
Old 10-11-2020, 10:35 PM
  #1  
Registered
Thread Starter
iTrader: (4)
 
Rookie's Avatar
 
Join Date: Jan 2003
Location: Grand Rapids, MI
Posts: 5,693
Received 1,204 Likes on 577 Posts
Default Extreme Measures... Make Over Edition

So, I finally got fed up with the damaged gel coat and not being able to get a shine on the boat. See thread Can't get a gloss on gel - Help . Also the outdated paint needed to be brought into the 2000's. This was always in the back of my mind when I purchased the boat in 2016. This summer it was expedited. I was talking to my friend (painter) at the start of the summer. I was checking out a couple boats he had just finished up. I was jokingly telling him I needed to get my boat painted in the next few years. He answered back "If I wanted to get it painted this summer he would use it as filler work between summer repairs". We worked out some details and we had a deal.
.
I told him I would DA off the painted graphics and all the clear coat (80, 220, 320 grit). I would bring the boat to him in a 320 grit ready for filler prime and block sand. And so the fun began...
Some of you might have already seen the pics on other social media platforms.
.








Last edited by Rookie; 10-11-2020 at 11:32 PM.
Rookie is offline  

Top Answer

10-11-2020, 10:58 PM
Rookie
Registered
Thread Starter
iTrader: (4)
 
Rookie's Avatar
 
Join Date: Jan 2003
Location: Grand Rapids, MI
Posts: 5,693
Received 1,204 Likes on 577 Posts
Default

And after many, many hours of work. I get to take it home.
All the paint is pearl metallic. Gold pearl in the orange, silver in the green, silver and dark silver. The dark charcoal (tear/ripped graphics) has an opal pearl metallic, it has all colors in it. In the sun this thing sparkles everywhere.







.
Old 10-11-2020, 10:39 PM
  #2  
Registered
Thread Starter
iTrader: (4)
 
Rookie's Avatar
 
Join Date: Jan 2003
Location: Grand Rapids, MI
Posts: 5,693
Received 1,204 Likes on 577 Posts
Default

When he received the boat they started repairing all the stress cracks in the hull. And there were a lot. Also I uncovered some damage under the paint. They also filled the unused holes in the transom and old generator exhaust holes.








Last edited by Rookie; 10-11-2020 at 11:04 PM.
Rookie is offline  
Old 10-11-2020, 10:42 PM
  #3  
Registered
Thread Starter
iTrader: (4)
 
Rookie's Avatar
 
Join Date: Jan 2003
Location: Grand Rapids, MI
Posts: 5,693
Received 1,204 Likes on 577 Posts
Default

Now that the repairs were made it was now filler primed and block sanded 3 times.
The side are now smooth and straight.




Last edited by Rookie; 10-11-2020 at 11:05 PM.
Rookie is offline  
The following users liked this post:
hblair (03-27-2021)
Old 10-11-2020, 10:45 PM
  #4  
Registered
Thread Starter
iTrader: (4)
 
Rookie's Avatar
 
Join Date: Jan 2003
Location: Grand Rapids, MI
Posts: 5,693
Received 1,204 Likes on 577 Posts
Default

Now the design tape was layed down.


.
Now some color was starting to get applied.
.



Rookie is offline  
The following 2 users liked this post by Rookie:
hblair (03-27-2021), ICDEDPPL (12-10-2020)
Old 10-11-2020, 10:46 PM
  #5  
Platinum Member
Platinum Member
 
jeff32's Avatar
 
Join Date: Jun 2004
Location: St-Hyacinthe, quebec, canada
Posts: 7,717
Received 366 Likes on 245 Posts
Default

Wow! Lots of work tight there! It not only paint! When transom assemblies are off, it means a project! Not only a paint!!
nice work! Keep it up!

whatcolor scheme younhave in mind?
jeff32 is offline  
Old 10-11-2020, 10:47 PM
  #6  
Registered
Thread Starter
iTrader: (4)
 
Rookie's Avatar
 
Join Date: Jan 2003
Location: Grand Rapids, MI
Posts: 5,693
Received 1,204 Likes on 577 Posts
Default

More color.
.



.
Some shadowing was being done.
.



Rookie is offline  
The following users liked this post:
ICDEDPPL (12-10-2020)
Old 10-11-2020, 10:48 PM
  #7  
Platinum Member
Platinum Member
 
jeff32's Avatar
 
Join Date: Jun 2004
Location: St-Hyacinthe, quebec, canada
Posts: 7,717
Received 366 Likes on 245 Posts
Default

Ok i posted at the same time you did or 1 second after you did, so... i can see what it is gonna look like !!!
jeff32 is offline  
Old 10-11-2020, 10:49 PM
  #8  
Registered
Thread Starter
iTrader: (4)
 
Rookie's Avatar
 
Join Date: Jan 2003
Location: Grand Rapids, MI
Posts: 5,693
Received 1,204 Likes on 577 Posts
Default

Next was to apply the masking for the tear effects in the paint.
.




Last edited by Rookie; 10-11-2020 at 11:17 PM.
Rookie is offline  
Old 10-11-2020, 10:51 PM
  #9  
Registered
Thread Starter
iTrader: (4)
 
Rookie's Avatar
 
Join Date: Jan 2003
Location: Grand Rapids, MI
Posts: 5,693
Received 1,204 Likes on 577 Posts
Default

Now peeling the tape back for some black, more shadows.


.
Preparing the deck and sides for the metallic silver fades.
.

Rookie is offline  
Old 10-11-2020, 10:52 PM
  #10  
Registered
Thread Starter
iTrader: (4)
 
Rookie's Avatar
 
Join Date: Jan 2003
Location: Grand Rapids, MI
Posts: 5,693
Received 1,204 Likes on 577 Posts
Default

Add a logo and spray some silver.
.



Rookie is offline  
The following 3 users liked this post by Rookie:
AnotherVice (03-21-2021), iaoutlaw (10-12-2020), ICDEDPPL (12-10-2020)


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.