2 questions for Pat
 

1- what is the brand/part number for the rub rail? Not the stainless insert, the rigid vinyl piece the insert goes into.

2- who is the manufacturer of the front boltster seat frames? Drives side seat base is bent and want to contact them on getting a new one.

Appreciate the help!

Boat is an 09 if needed.

Damn what have you been doing up there. I mean you're just a lake boater. :coolcowboy:

Taco Metal. V21-9613WHC20D

I have the seat bases custom made. It takes about 4 weeks. $1900 for side by side, powdercoated.

BTW, bent?? I have to see this.

The only other person I have ever seen bend one was Gordo. But that went along with some broken ribs, I believe.

It is only the piece that your butt sits on, not the base of the unit. I'll post a pic later. I'm 190 pounds, unsure the previous owner. Figured since it is out and all apart I would replace, but don't want to buy a complete setup for that little part.

Thanks Pat for your help!

Ship the part to me. I have a set of stands being delivered in about a week so will give it to the owner to duplicate.

Let me get it apart, appreciate your help.....many thanks!

The problem was the tube was hollow with welded end caps. Now they are solid, drilled and tapped.

190, Really.

Gordo got off easy on that one. I ended up with a fractured orbital socket and 21 stitches around my eye (that was with a helmet). Thank god he is an EMT and got us to shore and to the emergency room.

For all that we can same a 25' will do 84mph with an 500HP. Not recommended....