Offshoreonly.com
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Active Thunder (https://www.offshoreonly.com/forums/active-thunder-30/)
-   -   2nd Maiden Voyage (https://www.offshoreonly.com/forums/active-thunder/354452-2nd-maiden-voyage.html)

Griff 11-17-2018 01:51 AM
Originally Posted by Rookie (Post 4650636)
Getting it dialed in. Mismatched 26" Bravo 1's (round tip and sharp tipped) at 5600-5700 RPM, flat water on Lake Michigan. Need to step up to 28's and might have a line on them to try..Remember this is a non-stepped straight bottom with 454's. Yesterday was a good HP day.

Griff, I didn't forget about the gauge swap. Looks like it might be a winter project for us.
I'm actually getting a pair from Sick Stinger. You can still have mine. I have no use for them and they haven't been hooked up since about 1999, so I'm not sure if they work. If you've got some senders for the 60psi ones, that would be great.

Rookie 11-18-2018 10:13 AM
Originally Posted by Griff (Post 4659526)
I'm actually getting a pair from Sick Stinger. You can still have mine. I have no use for them and they haven't been hooked up since about 1999, so I'm not sure if they work. If you've got some senders for the 60psi ones, that would be great.
Great! I'll head to the shop this week and try to dig up the senders.
​​​​​​​Thanks

Rossman 02-21-2019 05:55 AM
Rookie,

Did you ever end up tearing the boat down for paint etc?
I boat from holland as well will have to keep my eyes open

Rookie 02-21-2019 09:07 PM
Originally Posted by Rossman (Post 4673663)
Rookie,

Did you ever end up tearing the boat down for paint etc?
I boat from holland as well will have to keep my eyes open
No, keeping the boat together this winter. Building engines to put back in my Panther and get that ready to sell this spring, also fixing up my cruiser to sell and going to start on a couple of car projects that have been on hold for too many years.
Definitely need to meet up this summer. I'm out every weekend on one of my boats, usually go out of GH,

Rookie 04-10-2019 08:38 PM
Originally Posted by Griff (Post 4659526)
I'm actually getting a pair from Sick Stinger. You can still have mine. I have no use for them and they haven't been hooked up since about 1999, so I'm not sure if they work. If you've got some senders for the 60psi ones, that would be great.
Griff, when you get the gauges installed. Let me know how the senders work. I'm going MPFI and will need to get senders for my EFI fuel gauges.
Thanks

Griff 04-13-2019 12:53 PM
Originally Posted by Rookie (Post 4681428)
Griff, when you get the gauges installed. Let me know how the senders work. I'm going MPFI and will need to get senders for my EFI fuel gauges.
Thanks
Going to be more difficult than I thought to connect the senders. The schrader valve on the fuel rail is too close to the upper manifold for them to connect directly to the rail. I will have to find some sort of extension/adapter. I tried to test them but probably wasn't getting a good enough ground to get them to work.


All times are GMT -5. The time now is 11:12 AM.
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.