Well we haven't done very much in the way of boating or anything else since my wife's wreck back in June. I pulled Remedy out a few weeks ago and got all the winterizing finished, so she's good until next year. Also had a friend call me from the local embroidery shop and told me he had something I needed to pick up. Well I get there and he had a piece of black carbon fiber vinyl with the AT logo embroidered on it in the perfect size for my Isotta steering wheel. I took a sometime yesterday afternoon to get it installed and it turned out great I think. Also there will be a few more small updates towards spring that we are looking forward to finishing up.
https://cimg5.ibsrv.net/gimg/www.off...1b144bd450.jpg

Chris who did the center wheel logo ?

My local screen printer / embroidery shop in Paducah. He does commercial accounts, but since I know him he helps me out. Give me a ring or send me a text if you need something.

will do I have the same wheel but no center logo, might see if he can do this


https://cimg7.ibsrv.net/gimg/www.off...61b05434c3.jpg

That should be pretty easy for him to take care of and I have plenty of black carbon fiber vinyl so I've got that covered for you.

Well I've been reading and watching many people with power levels a little lower than mine and having issues with the Imco SC lowers. Finally made a few calls to verify some of the issues they were having and thought to myself I really dont want to chance anything and wreck a nice new pair of Imco SCX uppers if my SC lowers break. I sent my Uppers back to Imco and had them mount the dual downshaft lowers with a 2 inch spacers and 1 7/16 propshafts. Only reason for having them mount the lowers is they run them on their dyno and send them full of oil and peace of mind if anything goes wrong it lessens it being my fault. Also learned the SCX combo is rotaation specific during this swap. I think we will be pretty well taken care of now since we have Drive Gaurdians and now full SCX drives. Brad @ IMCO took great care of us and got everything shipped to us in less than 2 weeks. Remedy will be heading back to Eddie Young's in a few weeks for drive install and a little pulley swap on the 3.8's for a little power boost. https://cimg2.ibsrv.net/gimg/www.off...70b1ca9017.jpg
https://cimg4.ibsrv.net/gimg/www.off...994e60242f.jpg

SCX combo is rotation specific?? Something to do with the dual down shaft lowers?

I would say it has something to do with the dual downshaft lowers, because Brad asked in my props spin in or out before they put them together. It suprised me when he asked that and they are marked on the tags LH and RH rotation.

you have to much money............:D.....looks nice

Well, sometimes you need to spend money to keep from costing yourself money... oh by the way, my bank account is telling me your done spending money on parts!!!!