Updated look for the AO 3100 ,Chris Cat and Awesome 31
#1
Gold Member
Gold Member
Thread Starter
Join Date: Oct 2002
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Updated look for the AO 3100 ,Chris Cat and Awesome 31
I have made new molds for the rear sides of the AO 3100. They should fit the Chris Cat and Awesome 31. .Let me know what you think of it. I did this to give more of a west coast look.The retrofit takes approximately 4 weeks. I can retrofit these Boats for $7000.00 at my shop in Texas. If interested Call me at 281-235-5174 or E mail me at [email protected]. [ATTACH=CONFIG]524594[/ATTACH][ATTACH=CONFIG]524595[/ATTACH][ATTACH=CONFIG]524596[/ATTACH]
#2
Registered
Looks good. We'll see how much speed it adds to your Shootout Run this year!
Bert
Bert
#4
Registered
Please excuse the sarcasm, the molds really modernize the hull from a visual perspective. Any tweaks to the motor or hull to compete in this year's LOTO Shootout? I know you've taken a lot of hardware home in years past with this boat.
#5
Gold Member
Gold Member
Thread Starter
Join Date: Oct 2002
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
I know you were kidding . i have not made any tweeks to the hull or motors. I am still trying to figure out why the motors are getting very rich above 130 mph. it has me stumped. I lowered the fuel pressure from 11psi to 8 psi thinking fuel was getting past the needle and seats but it didn't seem to help. the problem started at last years loto shootout and happened today at the texas outlaw challenge . I won my class at 136 but the transom was black again and was very slugish above 130 mph. last year I easily ran 141 at the Texas outlaw challenge.