I like the wrapped dash. Very trick and modern!

https://cimg0.ibsrv.net/gimg/www.off...0acae0f6c.jpeg
And a big thanx to my buddy Nate who drove all night to help me get the boat off the lift and go for its 1st ride in years!! Sadly it wasn’t on its own power! TowBoat did an amazing job as well!

From it's old age near death to rescue & rebirth Amazing! ~....are those tall deck 572"s....and full pleasure cabin?

Thank you! yes, 4.5" stroke with 4.535 bore, so it comes out a li'l bigger than 572. Main goal is to be able to cruise 60 mph at around 3600 rpms, not try to make this sled run in the 100's! too heavy!

https://cimg8.ibsrv.net/gimg/www.off...2680ac72d.jpeg
Thank you! it was like that from the beginning, just really worn from exposure.

If your runnig the same power that it had when it lived in RI, it should cruse way better than 60.... This thing was a beast....

Ok, if you said that was you Im doing something wrong.....:lolhit:Cheers awesome job...:ernaehrung004:

https://cimg3.ibsrv.net/gimg/www.off...78f94e56d.jpeg
Just the other side of the extrusions.

https://cimg9.ibsrv.net/gimg/www.off...8c59eba04.jpeg
Nope, my chubby butt was in the back monitoring the bilge pump I placed in there in case the bellows were leaking!

This boat definitely ended up in the RIGHT hands! :ernaehrung004: