Apache props
 

Hi need some help here with the right props ..41 Apache 1987 full cabin,ssm3 standard set up,twin Bandit 510 cubic and 690 hp N/A..max 5800-6000 rpm..Im putting everything together ,what size props 16.5 x 25 four blade ?
Thanks

First off with SSM3 at a standard height you really will not gain anything with a 4 blade prop. If the "X" dimension is raised close to or at the surface then the 4 blade will help. I would try a 16.5-17"x28" 3 blade.
I'd get ahold of Brett at BBlades for a good idea of what to look for Phone: 920-295-4435

I think a 28 is little to much for you. Boats heavy. I have #3 props in the swap 3 blade 16x28 will let go cheap they are short hub props. They may not be rite for you but may be something to give you an idea. And would work for a spare set.

16x25 or 16x26 4 blade would be my guess.

HI i bought 16,5 x 25 in 4 blade..one of the other Guys is running 16,5 x 26 with a little less power..

there is a pair of 17x26 3 blade # 3 props on ebay
800.00
if interested type in cleaver propellers in search
cheap test props

I have a brand new set of Merc Racing 3-blades still in box, they are big shaft though, 26 spline. 17.25 x 27 x 18 degree rake.

leif unless I missed it what gear ratio in the drives

Hi
the drives are arriving this week from the states ,but i was told 1.47..

Buddy runs the 3 blade on his #41 and has had good luck with them. Not sure of the actual size though.

Will keep you guys posted on my project ..all parts arriving next week from the states ..cant wait ..