The boat reacts alot less to trim, pretty much set it and forget it. No problems for me to get up on plane. I have 1.34 gear and 32 pitch props.

As it sits now, my boat runs best with very little trim, (very different than running a v-Bottom) Has anyone tried cutting off the diffuser ring? I'm wondering if this would have any effect? I will definitely be swapping over to -2 lowers, once I get bored in the 100 zone & want to take it to the next level
:p

Looks to be some difference in the exhaust locations/drive locations between the Awesome and the AO.

Almost looks like the motors are further outboard then mine are.

may be the angle, I'll post a shot straight on the back - let's see some more pics of that paint job:cool-smiley-027:

yea maybe the angle. Still looks like your outer exhaust is closer to the side of the boat.

Paint is not 100% done yet. Still need to put the new rub rail back on and paint the windshield area. Motors are still out also waiting on a thru-hull water pickeup to show up from Dana marine. New side vents are on order. I will post some pics shortly once it is back together.
I also have a full swim platform to paint and bolt on.

I deffinitly had it torn apart.

freshly redone trailer waiting on the boat to be finished.

:cool-smiley-027:

Can you measure from center to center on the two center exhaust tips? Mine is 42.5 inches if I recall. I am just curious, not a big deal if you can't.

Deffinitly a difference in engine location. Check out the reference lines I added.