![]() |
OK Baja owners check this out!!!
3 Attachment(s)
I upgraded the gauges and controls on my 322...what do you think? :D
I have decided to go with a yellow and purple color scheme to match the yellow & purple graphics. Everything related to the port side motor is done in yellow and everything related to the starboard side is done in purple. All white gauges are neutral, I may have to add a little color to them later. |
Re: OK Baja owners check this out!!!
looks like from the pics that the two primary colors on the side of the boat are green and yellow???
|
Re: OK Baja owners check this out!!!
actually the boat graphics are teal, purple and yellow, but teal is not my favorite so I decided to go with the purple and yellow... :drink:
|
Re: OK Baja owners check this out!!!
what does it take to install the gauges for drive temp? I am assuming that is what the one on the right top is with the 2 needles, or is it a pyrometer?
BTW Don, the speedo I got from you is perfect! Thanks again! |
Re: OK Baja owners check this out!!!
Originally Posted by JasonSmith
what does it take to install the gauges for drive temp? I am assuming that is what the one on the right top is with the 2 needles, or is it a pyrometer?
BTW Don, the speedo I got from you is perfect! Thanks again! The gauge in the upper right is a pyrometer...neither gauge (pyro or drive temp.) is all that difficult to install it just takes a little while. In fact, with the exception of having to run the hose through the transom, hooking up a drive temp. gauge is pretty easy. Livorsi's senders are designed to mount in the oil vent hole. Take care, Don Baca |
| All times are GMT -5. The time now is 11:00 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.