Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Baja (https://www.offshoreonly.com/forums/baja-31/)
-   -   Question for 36 outlaw owners (https://www.offshoreonly.com/forums/baja/127450-question-36-outlaw-owners.html)

baja36ft 04-14-2006 10:11 AM

Re: Question for 36 outlaw owners
 
What Prop Do You Have On Know??

BajaRunner 04-14-2006 10:47 AM

Re: Question for 36 outlaw owners
 

Originally Posted by baja36ft
What Prop Do You Have On Know??

The 26's I got from you.

baja36ft 04-14-2006 12:47 PM

Re: Question for 36 outlaw owners
 
Well If You Add More Cup That Will Drop Your Rpm.

BajaRunner 04-14-2006 12:54 PM

Re: Question for 36 outlaw owners
 

Originally Posted by baja36ft
Well If You Add More Cup That Will Drop Your Rpm.

most times yes, but if i have too much wetted surface, and cant get the boat up out of the water (too much trim still doesnt help) i might not loose much if i truely can get the boat out of the water more. i guess the best way is to try my 28's (with cup) and see what the boat does. Im hoping i can lab them and get in the 5400 range.

BajaRunner 04-14-2006 02:41 PM

Re: Question for 36 outlaw owners
 
Damn, its too nice of a day. Im out to Lake Travis. 80+ degrees outside with some 28p bravo 1's waiting. :D :D

Ill report back tomorrow on how they did.

In2Deep 04-15-2006 11:42 AM

Re: Question for 36 outlaw owners
 
Is there still water in Travis? I hear it's WAY down.

baja36ft 04-15-2006 08:19 PM

Re: Question for 36 outlaw owners
 

Originally Posted by BajaRunner
Damn, its too nice of a day. Im out to Lake Travis. 80+ degrees outside with some 28p bravo 1's waiting. :D :D

Ill report back tomorrow on how they did.

PLEASE TELL THE RESULTS!!!!!!!
IF THE 28'S DON'T WORK I HAVE SOMEONE TO BUY THOSE
TO.

BajaRunner 04-16-2006 07:34 AM

Re: Question for 36 outlaw owners
 

Originally Posted by baja36ft
PLEASE TELL THE RESULTS!!!!!!!
IF THE 28'S DON'T WORK I HAVE SOMEONE TO BUY THOSE
TO.

I got out there and forgot the prop wrench :(

I had already switched the 26's to out, and i actually picked up rpms. i lost 1 mph top end. 5600 rpms at 73.

BajaRunner 04-30-2006 09:00 AM

Re: Question for 36 outlaw owners
 
Well got the 28's out, and MAN did it kill performance!!

The most I could get out of it was 4600 rpms at 68mph.

Previously I ran the labbed 26's at 5600 @ 74.

the 28's are stock and the 26's are labbed. From 26's to 28's i should drop about 400 rpms, then the 26's are labbed, so i should lose another 300. which would put me around 4900. but i figure this knocked me out of my horsepower band and killed performance. midrange sucked bad, and it took it a lot longer to get to WOT.

I dont know what the next step is. Ill probably load the boat up with a bunch of people and fuel and see where it spins to.

I also have a pair of 3 blades i want to try. Ive got the lower "x" so its worth a shot for a little on the top.

BajaRunner 04-30-2006 09:00 AM

Re: Question for 36 outlaw owners
 
The one thing i noticed though was my prop slipped dropped into a pretty good range. if i could only figure out how to do that with the 26's ill get those last couple of mph.


All times are GMT -5. The time now is 06:51 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.